EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tribo-Electrostatic Separation for Recovery of Plastic Polymers from Waste Electrical and Electronic Equipment

Annarita Fiorente, Germano D’Agostino, Andrea Petrella, Francesco Todaro, Michele Notarnicola

Clean Technologies · 12.08.2026 · 8 (4) · 129

DOI: 10.3390/cleantechnol8040129 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clean Technologies, online erschienen am 12.08.2026. Verfasst von Annarita Fiorente und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fastest growing waste stream worldwide is represented by Waste from Electrical and Electronic Equipment (WEEE). One of the main critical issues related to the recovery of such waste is the mixed plastic fraction, which is difficult to sort and can contain flame retardants and additives that pose a risk to human health and the environment. This study aims to validate the possibility of using tribo-electrostatic separator technologies to sort plastic polymers (e.g., PP, PA6, PS and PVC) obtained after a size-reduction operation of WEEE. The experimental study was conducted on a 10 kg/h laboratory-scale pilot plant. Several parameters were analysed during the tribo-charging and electrostatic separation processes, including the rotation speed and residence time of the particles in the tribo-charging device as well as electrode voltage, and the distance between the deflectors and the electrodes in the electrostatic separator. The results show that the tribo-electrostatic separation technologies are promising and efficient for plastic waste recycling. In fact, under specific conditions, it is possible to achieve high recovery rates (>70%) and purity levels (>76%) that allow the reintegration of plastic polymers into the economic cycle as a secondary raw material.

Zitieren

APA

Fiorente, A., D’Agostino, G., Petrella, A., Todaro, F., & Notarnicola, M. (2026). Tribo-Electrostatic Separation for Recovery of Plastic Polymers from Waste Electrical and Electronic Equipment. Clean Technologies, 8(4), 129. https://doi.org/10.3390/cleantechnol8040129

Vancouver

Fiorente A, D’Agostino G, Petrella A, Todaro F, Notarnicola M. Tribo-Electrostatic Separation for Recovery of Plastic Polymers from Waste Electrical and Electronic Equipment. Clean Technologies. 2026;8(4):129. doi:10.3390/cleantechnol8040129

BibTeX
@article{Fiorente2026,
  author = {Fiorente, Annarita and D’Agostino, Germano and Petrella, Andrea and Todaro, Francesco and Notarnicola, Michele},
  title = {Tribo-Electrostatic Separation for Recovery of Plastic Polymers from Waste Electrical and Electronic Equipment},
  journal = {Clean Technologies},
  year = {2026},
  volume = {8},
  number = {4},
  pages = {129},
  doi = {10.3390/cleantechnol8040129}
}
Kostenlos starten →