Greener Polyurethane Adhesive Derived from Polyvinyl Alcohol/Tannin-Based Polyol for Plywood
Clean Technologies · 04.11.2025 · 7 (4) · 98
DOI: 10.3390/cleantechnol7040098 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clean Technologies, online erschienen am 04.11.2025. Verfasst von Dhimas Pramadhani und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Organization of Nanotechnology and Materials, the National Research and Innovation Agency (BRIN), Republic of Indonesia.
Abstract (Originalsprache)
The reaction between polyols and diisocyanates forms polyurethane (PU) adhesives. However, these materials are derived from petroleum-based chemicals, whose availability is declining. As an environmentally friendly, renewable, and formaldehyde-free alternative, tannins offer a promising solution. This study aimed to characterize tannin-based polyurethane (TPU) adhesives modified with bio-polyol, analyze their performance, and determine optimal tannin extract formulation for use as a plywood adhesive, as the first step toward developing eco-friendly TPU adhesives. TPU adhesives were made using modified polyvinyl alcohol (PVOH) and tannins at concentration levels of 0%, 10%, 20%, 30%, 40%, and 50%. The analysis is carried out on raw materials, adhesives, and plywood. The results showed that adding tannin extracts had a significant effect on viscosity, tannin solids content, density, delamination, and dry and wet adhesion strength, but not for moisture content. Functional group analysis (FTIR) confirmed that both liquid and solid TPU adhesives contained urethane, hydroxyl, and isocyanate functional groups. The lowest DMA loss modulus was observed in TPU with tannin 20%. Additionally, the highest adhesion strength was achieved with 20% TPU, which correlated with increased wood failure. Based on these findings, PVOH/tannin 20% was considered an effective formula for TPU adhesives.
Förderung
- Research Organization of Nanotechnology and Materials, the National Research and Innovation Agency (BRIN), Republic of Indonesia
Zitieren
APA
Pramadhani, D., Sari, R. K., Mubarok, M., Iswanto, A. H., Papadopoulos, A., Papadopoulou, I. A., Raptis, D. I., Karliati, T., & Lubis, M. A. R. (2025). Greener Polyurethane Adhesive Derived from Polyvinyl Alcohol/Tannin-Based Polyol for Plywood. Clean Technologies, 7(4), 98. https://doi.org/10.3390/cleantechnol7040098
Vancouver
Pramadhani D, Sari RK, Mubarok M, Iswanto AH, Papadopoulos A, Papadopoulou IA, et al. Greener Polyurethane Adhesive Derived from Polyvinyl Alcohol/Tannin-Based Polyol for Plywood. Clean Technologies. 2025;7(4):98. doi:10.3390/cleantechnol7040098
BibTeX
@article{Pramadhani2025,
author = {Pramadhani, Dhimas and Sari, Rita Kartika and Mubarok, Mahdi and Iswanto, Apri Heri and Papadopoulos, Antonios and Papadopoulou, Ioanna A. and Raptis, Dimitrios I. and Karliati, Tati and Lubis, Muhammad Adly Rahandi},
title = {Greener Polyurethane Adhesive Derived from Polyvinyl Alcohol/Tannin-Based Polyol for Plywood},
journal = {Clean Technologies},
year = {2025},
volume = {7},
number = {4},
pages = {98},
doi = {10.3390/cleantechnol7040098}
}
EUVIMED