EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Adhesion and Cohesion Performance of Polyurethane Made of Bio‐Polyol Derived from Modified Waste Cooking Oil for Exterior Grade Plywood

Sena Maulana, Ika Putri Setiawan, Dyah Pusbanarum, Petar Antov, Apri Heri Iswanto, Lubos Kristak, Seng Hua Lee, Muhammad Adly Rahandi Lubis

Macromolecular Materials and Engineering · 2024-12 · 309 (12)

DOI: 10.1002/mame.202400225 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 16.08.2024. Verfasst von Sena Maulana und 7 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agentúra Ministerstva školstva, vedy, výskumu a športu SR.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explored the feasibility of Waste Cooking Oil (WCO)‐based Bio‐Polyurethane (Bio‐PU) as an eco‐friendly alternative to petroleum‐derived polyols in plywood adhesives. The objective is to evaluate the impact of varied WCO concentrations and methylene diphenyl diisocyanate (MDI) levels on Bio‐PU and plywood performance. The Bio‐PU's characteristics, rheology, and functional groups are studied. Plywood made from three layers of 100 mm x 100 mm × 2 mm rubberwood ( Hevea brasiliensis ) veneer is bonded with Bio‐PU using a dual spread approach at 180 g.m −2 , hot pressed at 120 °C and 1 MPa for 4 min. The laboratory‐fabricated plywood is tested for physical, mechanical, and adhesive properties. Results showed that Bio‐PU exhibited unique adhesive characteristics, with excellent adhesive strength, despite a slight decrease with higher WCO concentrations. WCO insertion do not compromise delamination resistance. FTIR analysis confirmed successful polyurethane chain synthesis. This research highlighted the potential of WCO‐based Bio‐PU's as a sustainable, high‐performance plywood adhesive.

Förderung

  • Agentúra Ministerstva školstva, vedy, výskumu a športu SR

Zitieren

APA

Maulana, S., Setiawan, I. P., Pusbanarum, D., Antov, P., Iswanto, A. H., Kristak, L., Lee, S. H., & Lubis, M. A. R. (2024). Adhesion and Cohesion Performance of Polyurethane Made of Bio‐Polyol Derived from Modified Waste Cooking Oil for Exterior Grade Plywood. Macromolecular Materials and Engineering, 309(12). https://doi.org/10.1002/mame.202400225

Vancouver

Maulana S, Setiawan IP, Pusbanarum D, Antov P, Iswanto AH, Kristak L, et al. Adhesion and Cohesion Performance of Polyurethane Made of Bio‐Polyol Derived from Modified Waste Cooking Oil for Exterior Grade Plywood. Macromolecular Materials and Engineering. 2024;309(12). doi:10.1002/mame.202400225

BibTeX
@article{Maulana2024,
  author = {Maulana, Sena and Setiawan, Ika Putri and Pusbanarum, Dyah and Antov, Petar and Iswanto, Apri Heri and Kristak, Lubos and Lee, Seng Hua and Lubis, Muhammad Adly Rahandi},
  title = {Adhesion and Cohesion Performance of Polyurethane Made of Bio‐Polyol Derived from Modified Waste Cooking Oil for Exterior Grade Plywood},
  journal = {Macromolecular Materials and Engineering},
  year = {2024},
  volume = {309},
  number = {12},
  doi = {10.1002/mame.202400225}
}
Kostenlos starten →