EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electro-Physical Model of Amorphous Silicon Junction Field-Effect Transistors for Energy-Efficient Sensor Interfaces in Lab-on-Chip Platforms

Nicola Lovecchio, Giulia Petrucci, Fabio Cappelli, Martina Baldini, Vincenzo Ferrara, Augusto Nascetti, Giampiero de Cesare, Domenico Caputo

Chips · 12.01.2026 · 5 (1) · 1

DOI: 10.3390/chips5010001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chips, online erschienen am 12.01.2026. Verfasst von Nicola Lovecchio und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sapienza University Research Project 2024.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents an advanced electro-physical model for hydrogenated amorphous silicon (a-Si:H) Junction Field Effect Transistors (JFETs) to enable the design of devices with energy-efficient analog interface building blocks for Lab-on-Chip (LoC) systems. The presence of this device can support monolithic integration with thin-film sensors and circuit-level design through a validated compact formulation. The model accurately describes the behavior of a-Si:H JFETs addressing key physical phenomena, such as the channel thickness dependence on the gate-source voltage when the channel approaches full depletion. A comprehensive framework was developed, integrating experimental data and mathematical refinements to ensure robust predictions of JFET performance across operating regimes, including the transition toward full depletion and the associated current-limiting behavior. The model was validated through a broad set of fabricated devices, demonstrating excellent agreement with experimental data in both the linear and saturation regions. Specifically, the validation was carried out at 25 °C on 15 fabricated JFET configurations (12 nominally identical devices per configuration), using the mean characteristics of 9 devices with standard-deviation error bars. In the investigated bias range, the devices operate in a sub-µA regime (up to several hundred nA), which naturally supports µW-level dissipation for low-power interfaces. This work provides a compact, experimentally validated modeling basis for the design and optimization of a-Si:H JFET-based LoC front-end/readout circuits within technology-constrained and energy-efficient operating conditions.

Förderung

  • Sapienza University Research Project 2024

Zitieren

APA

Lovecchio, N., Petrucci, G., Cappelli, F., Baldini, M., Ferrara, V., Nascetti, A., Cesare, G. D., & Caputo, D. (2026). Electro-Physical Model of Amorphous Silicon Junction Field-Effect Transistors for Energy-Efficient Sensor Interfaces in Lab-on-Chip Platforms. Chips, 5(1), 1. https://doi.org/10.3390/chips5010001

Vancouver

Lovecchio N, Petrucci G, Cappelli F, Baldini M, Ferrara V, Nascetti A, et al. Electro-Physical Model of Amorphous Silicon Junction Field-Effect Transistors for Energy-Efficient Sensor Interfaces in Lab-on-Chip Platforms. Chips. 2026;5(1):1. doi:10.3390/chips5010001

BibTeX
@article{Lovecchio2026,
  author = {Lovecchio, Nicola and Petrucci, Giulia and Cappelli, Fabio and Baldini, Martina and Ferrara, Vincenzo and Nascetti, Augusto and Cesare, Giampiero de and Caputo, Domenico},
  title = {Electro-Physical Model of Amorphous Silicon Junction Field-Effect Transistors for Energy-Efficient Sensor Interfaces in Lab-on-Chip Platforms},
  journal = {Chips},
  year = {2026},
  volume = {5},
  number = {1},
  pages = {1},
  doi = {10.3390/chips5010001}
}
Kostenlos starten →