EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Parameters on Surface Properties and the Optimization of HVOF-Sprayed NiCr/WC-Co Coatings

Weimin Luo, Mingder Jean

Ceramics · 17.05.2026 · 9 (5) · 51

DOI: 10.3390/ceramics9050051 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ceramics, online erschienen am 17.05.2026. Verfasst von Weimin Luo und 1 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fujian Social Sciences Association, Concept of Green and Low Carbon Research Project of Fujian Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study centred on the parametric optimisation and performance prediction of NiCr/WC-Co coatings produced by high-velocity oxygen fuel (HVOF) spraying. An L18 orthogonal experimental design based on the Taguchi method and the response surface method (RSM) was adopted to examine how key process parameters affect the microstructure, phase composition and hardness of the coatings. The results revealed that analysis of variance (ANOVA) indicated that travel speed, methane flow rate, powder feed rate, and stand-off distance were the primary parameters affecting coating hardness, collectively accounting for 76.25% of the total variance. Also, the RSM model established in this study demonstrates remarkably high predictive accuracy, with a coefficient of determination (R2) of 0.985 and an average prediction error of just 1.16%. Verification experiments were also conducted under optimal conditions. The measured hardness was 1352.7 ± 75 HV, in close agreement with the predicted value of 1365 HV. The coating, which was applied using HVOF spraying, had a dense layered structure and low porosity, and the decarburisation of the tungsten carbide was extremely minimal. In addition, interfacial bonding is improved and structural defects are reduced by the addition of a NiCr intermediate layer. It is demonstrated by the results that the Taguchi-RSM method is reliable for the optimization of HVOF spraying parameters and the prediction of coating hardness.

Förderung

  • Fujian Social Sciences Association
  • Concept of Green and Low Carbon Research Project of Fujian Province

Zitieren

APA

Luo, W., & Jean, M. (2026). The Influence of Parameters on Surface Properties and the Optimization of HVOF-Sprayed NiCr/WC-Co Coatings. Ceramics, 9(5), 51. https://doi.org/10.3390/ceramics9050051

Vancouver

Luo W, Jean M. The Influence of Parameters on Surface Properties and the Optimization of HVOF-Sprayed NiCr/WC-Co Coatings. Ceramics. 2026;9(5):51. doi:10.3390/ceramics9050051

BibTeX
@article{Luo2026,
  author = {Luo, Weimin and Jean, Mingder},
  title = {The Influence of Parameters on Surface Properties and the Optimization of HVOF-Sprayed NiCr/WC-Co Coatings},
  journal = {Ceramics},
  year = {2026},
  volume = {9},
  number = {5},
  pages = {51},
  doi = {10.3390/ceramics9050051}
}
Kostenlos starten →