Polycarbonate–Acrylonitrile Butadiene Styrene Three Dimensional Printing Material Exhibits Biocompatibility and Enhances Osteogenesis and Gingival Tissue Formation with Human Cells
Cells · 22.01.2025 · 14 (3) · 167
DOI: 10.3390/cells14030167 ↗Kurz gefasst
Fachartikel in der Zeitschrift Cells, online erschienen am 22.01.2025. Verfasst von Li Xiao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physiology, School of Life Dentistry at Tokyo, The Nippon Dental University, 1-9-20 Fujimi, Chiyoda-ku, Tokyo 102-8159, Japan. Hauptthemen laut MEDLINE: Gingiva, Printing, Three-Dimensional, Osteogenesis, Biocompatible Materials. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science, JSPS KAKENHI Grant-in-Aid for Scientific Research (C), Grant-in-Aid for Challenging Research (Exploratory).
Abstract (Originalsprache)
Three dimensional (3D) printing materials are widely used in dental applications, but their biocompatibility and interactions with human cells require evaluation. This study aimed to identify materials meeting biocompatibility, mechanical strength, and tissue-forming requirements for safe dental applications. We assessed the cytotoxicity of resins and thermoplastic filaments in human HaCaT keratinocytes, gingival fibroblasts (hGFs), and stem cells from human exfoliated deciduous teeth (SHED) using PrestoBlue assays. Three resins, including two types of surgical guide resins, exhibited strong cytotoxicity after 4–72 h, while 2 h exposure to an FDA-approved surgical guide resin did not affect SHED cell viability. In contrast, six thermoplastic filaments showed no significant cytotoxicity even after 72 h. Among these, polycarbonate–acrylonitrile butadiene styrene (PC-ABS) demonstrated excellent toughness, heat resistance, and surface quality at a low cost. SHED cells cultured on PC-ABS dishes and micro bone structures showed strong proliferation and osteogenic potential. Culture inserts made of PC-ABS also supported the growth of HaCaT keratinocytes and the hGFs formed gingival tissue, which was superior to that formed on commercially available PET inserts. In conclusion, PC-ABS is a promising 3D printing material for dental applications due to its biocompatibility, ability to promote osteogenesis, and support for gingival tissue formation, with no observed cytotoxicity.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Physiology, School of Life Dentistry at Tokyo, The Nippon Dental University, 1-9-20 Fujimi, Chiyoda-ku, Tokyo 102-8159, Japan.
- Department of Dental Anesthesiology, School of Life Dentistry at Tokyo, The Nippon Dental University, 1-9-20 Fujimi, Chiyoda-ku, Tokyo 102-8159, Japan.
- Department of Oral and Maxillofacial Radiology, School of Life Dentistry at Tokyo, The Nippon Dental University, 1-9-20 Fujimi, Chiyoda-ku, Tokyo 102-8159, Japan.
- Department of Developmental and Regenerative Dentistry, School of Life Dentistry at Tokyo, The Nippon Dental University, 1-9-20 Fujimi, Chiyoda-ku, Tokyo 102-8159, Japan.
- Department of Life Science Dentistry, The Nippon Dental University, 1-9-20 Fujimi, Chiyoda-ku, Tokyo 102-8159, Japan.
ORCID-Profile: Li Xiao, Naohiro Shimamura, Takashi Kamio, Ryoji Ide, Mai Mochizuki, Taka Nakahara
Förderung
- Japan Society for the Promotion of Science
- JSPS KAKENHI Grant-in-Aid for Scientific Research (C)
- Grant-in-Aid for Challenging Research (Exploratory)
- Grant-in-Aid for Scientific Research (B)
- Grant-in-Aid for Young Scientists (B)
Zitieren
APA
Xiao, L., Shimamura, N., Kamio, T., Ide, R., Mochizuki, M., & Nakahara, T. (2025). Polycarbonate–Acrylonitrile Butadiene Styrene Three Dimensional Printing Material Exhibits Biocompatibility and Enhances Osteogenesis and Gingival Tissue Formation with Human Cells. Cells, 14(3), 167. https://doi.org/10.3390/cells14030167
Vancouver
Xiao L, Shimamura N, Kamio T, Ide R, Mochizuki M, Nakahara T. Polycarbonate–Acrylonitrile Butadiene Styrene Three Dimensional Printing Material Exhibits Biocompatibility and Enhances Osteogenesis and Gingival Tissue Formation with Human Cells. Cells. 2025;14(3):167. doi:10.3390/cells14030167
BibTeX
@article{Xiao2025,
author = {Xiao, Li and Shimamura, Naohiro and Kamio, Takashi and Ide, Ryoji and Mochizuki, Mai and Nakahara, Taka},
title = {Polycarbonate–Acrylonitrile Butadiene Styrene Three Dimensional Printing Material Exhibits Biocompatibility and Enhances Osteogenesis and Gingival Tissue Formation with Human Cells},
journal = {Cells},
year = {2025},
volume = {14},
number = {3},
pages = {167},
doi = {10.3390/cells14030167}
}
EUVIMED