Numerical Study on Ignition and Combustion Characteristics of Symmetric and Asymmetric U-Bend Catalytic Micro-Burners: A Comparison with the Straight-Channel Design
Catalysts · 09.07.2026 · 16 (7) · 624
DOI: 10.3390/catal16070624 ↗Kurz gefasst
Fachartikel in der Zeitschrift Catalysts, online erschienen am 09.07.2026. Verfasst von Mengmeng Yu und 7 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Association of Transportation Education and Research.
Abstract (Originalsprache)
Geometric asymmetry in recirculating micro-burners remains underexplored in catalytic micro-combustion research, despite its potential to significantly influence ignition behavior. This numerical study investigates the ignition and combustion characteristics of four micro-channel catalytic burners with distinct geometric configurations, aiming to evaluate the role of asymmetry on combustion behavior. Burner 1 is a straight-channel design without heat recirculation. Burners 2–4 are U-bend recirculating configurations: Burner 2 with symmetric channel sizes, Burner 3 with a wider inlet channel, and Burner 4 with a narrower inlet channel. A two-dimensional computational fluid dynamics model with a one-step global propane oxidation mechanism and catalytic wall reactions is employed. The results show that Burner 1 exhibits the highest ignition temperature (555 K) and shortest ignition delay (28.5 s) due to its low thermal mass. Among U-bend burners, Burner 4 achieves the lowest ignition temperature (530 K) and the highest steady-state combustion temperature (1726 K), owing to reduced recirculation velocity and enhanced thermal feedback. Burner 2 shows moderate performance, while Burner 3 gives the weakest combustion intensity among recirculating designs. The heterogeneous reaction contribution is highest in Burner 1 (69.3%) and lowest in Burners 2 and 3 (~55%). Asymmetric channel sizing, particularly a narrow catalytic channel combined with a wide recirculation channel (Burner 4), significantly improves ignition and combustion performance under cold-start conditions.
Förderung
- China Association of Transportation Education and Research
Zitieren
APA
Yu, M., Bi, J., Li, Z., Sun, Q., Feng, G., Zhai, W., Kong, X., & Lv, J. (2026). Numerical Study on Ignition and Combustion Characteristics of Symmetric and Asymmetric U-Bend Catalytic Micro-Burners: A Comparison with the Straight-Channel Design. Catalysts, 16(7), 624. https://doi.org/10.3390/catal16070624
Vancouver
Yu M, Bi J, Li Z, Sun Q, Feng G, Zhai W, et al. Numerical Study on Ignition and Combustion Characteristics of Symmetric and Asymmetric U-Bend Catalytic Micro-Burners: A Comparison with the Straight-Channel Design. Catalysts. 2026;16(7):624. doi:10.3390/catal16070624
BibTeX
@article{Yu2026,
author = {Yu, Mengmeng and Bi, Jiangtao and Li, Zunmin and Sun, Qingyun and Feng, Guofang and Zhai, Wei and Kong, Xiangjin and Lv, Jinsheng},
title = {Numerical Study on Ignition and Combustion Characteristics of Symmetric and Asymmetric U-Bend Catalytic Micro-Burners: A Comparison with the Straight-Channel Design},
journal = {Catalysts},
year = {2026},
volume = {16},
number = {7},
pages = {624},
doi = {10.3390/catal16070624}
}
EUVIMED