EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Analysis of Ignition and Combustion Characteristics in Straight-Channel and U-Bend Micro Catalytic Combustors: Numerical Investigation of Inlet Velocity Effects

Zhen Wang, Jiangtao Bi, Zunmin Li, Mengmeng Yu, Wenli Ma, Wei Zhai, Jinsheng Lv, Xiangjin Kong

Catalysts · 01.06.2026 · 16 (6) · 506

DOI: 10.3390/catal16060506 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Catalysts, online erschienen am 01.06.2026. Verfasst von Zhen Wang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Association of Transportation Education and Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a numerical comparative study on the ignition characteristics of straight-channel and U-bend micro catalytic combustors, with particular focus on the role of inlet velocity. A two-dimensional computational fluid dynamics model with coupled gas-phase and surface catalytic reaction kinetics for propane combustion is developed using a fluid simulation program ANSYS Fluent. The catalyst coating (Pt/Al2O3) is modeled as a zero-thickness reaction surface, and the U-bend design features an uncoated recirculating channel to ensure identical catalyst loading between the two configurations. Simulations are conducted over an inlet velocity range of 0.25–8 m/s. Key ignition and combustion metrics including ignition temperature, ignition time, maximum combustion temperature, heterogeneous reaction contribution, and thermal/species field distributions are systematically compared. Results reveal a crossover in relative performance depending on flow regime. At low velocities (≤2 m/s), the straight-channel combustor exhibits lower ignition temperatures; at high velocities (≥4 m/s), the U-bend design achieves superior ignition performance with lower ignition temperatures (e.g., 526 K vs. 555 K at 8 m/s) and higher combustion temperatures (1726 K vs. 1474 K at 8 m/s). However, the straight-channel combustor consistently yields shorter ignition times across all velocities (25.9–108.6 s) compared to the U-bend (52.6–145.2 s). The heterogeneous reaction contribution decreases with increasing inlet velocity for both designs, with the straight-channel maintaining higher values than the U-bend. The U-bend achieves higher maximum temperatures due to enhanced heat recirculation, particularly at high flow rates. The findings suggest that the U-bend configuration is advantageous for high-flow-rate applications requiring low ignition temperatures and high combustion temperatures, whereas the straight-channel design is preferable for rapid cold-start scenarios.

Förderung

  • China Association of Transportation Education and Research

Zitieren

APA

Wang, Z., Bi, J., Li, Z., Yu, M., Ma, W., Zhai, W., Lv, J., & Kong, X. (2026). Comparative Analysis of Ignition and Combustion Characteristics in Straight-Channel and U-Bend Micro Catalytic Combustors: Numerical Investigation of Inlet Velocity Effects. Catalysts, 16(6), 506. https://doi.org/10.3390/catal16060506

Vancouver

Wang Z, Bi J, Li Z, Yu M, Ma W, Zhai W, et al. Comparative Analysis of Ignition and Combustion Characteristics in Straight-Channel and U-Bend Micro Catalytic Combustors: Numerical Investigation of Inlet Velocity Effects. Catalysts. 2026;16(6):506. doi:10.3390/catal16060506

BibTeX
@article{Wang2026,
  author = {Wang, Zhen and Bi, Jiangtao and Li, Zunmin and Yu, Mengmeng and Ma, Wenli and Zhai, Wei and Lv, Jinsheng and Kong, Xiangjin},
  title = {Comparative Analysis of Ignition and Combustion Characteristics in Straight-Channel and U-Bend Micro Catalytic Combustors: Numerical Investigation of Inlet Velocity Effects},
  journal = {Catalysts},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {506},
  doi = {10.3390/catal16060506}
}
Kostenlos starten →