From Rubble to Residence: A Critical Narrative Review of Circular Geopolymer 3D Concrete Printing for Post-Disaster Urban Reconstruction
Buildings · 18.11.2026 · 16 (22) · 4606
DOI: 10.3390/buildings16224606 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 18.11.2026. Verfasst von Shilthia Monalisa und 1 weiteren Autor:innen. Die Arbeit nennt 105 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Disasters that destroy housing also generate vast quantities of rubble, yet debris management and reconstruction are usually treated as separate problems. This critical narrative review examines whether disaster rubble, reprocessed as feedstock for geopolymer 3D concrete printing (3DCP), could link the two, and tests the claim that such a loop reduces debris burden, cost, and delivery time simultaneously. Evidence was classified by type and directness. Construction and demolition waste, mainly ground brick, tile, and concrete, can serve as precursor and aggregate in printable alkali-activated mortars, but only at laboratory and component scale; no study has used field-collected disaster rubble, and seven of the nine studies combining all three elements come from a single institution. Circularity is partial, because activators and supplementary precursors remain imported. Environmental benefits are plausible but unquantified, and the costs of processing rubble are unmeasured. Hazardous materials, corrosive activators, durability gaps, and the absence of certification routes for high-seismic regions are binding constraints. Analogous reconstruction programs in Chile and Nepal suggest that governance will matter as much as technology. Circular geopolymer 3DCP should therefore be pursued as a staged research and demonstration program rather than presented as a ready solution.
Zitieren
APA
Monalisa, S., & Mostafiz, R. B. (2026). From Rubble to Residence: A Critical Narrative Review of Circular Geopolymer 3D Concrete Printing for Post-Disaster Urban Reconstruction. Buildings, 16(22), 4606. https://doi.org/10.3390/buildings16224606
Vancouver
Monalisa S, Mostafiz RB. From Rubble to Residence: A Critical Narrative Review of Circular Geopolymer 3D Concrete Printing for Post-Disaster Urban Reconstruction. Buildings. 2026;16(22):4606. doi:10.3390/buildings16224606
BibTeX
@article{Monalisa2026,
author = {Monalisa, Shilthia and Mostafiz, Rubayet Bin},
title = {From Rubble to Residence: A Critical Narrative Review of Circular Geopolymer 3D Concrete Printing for Post-Disaster Urban Reconstruction},
journal = {Buildings},
year = {2026},
volume = {16},
number = {22},
pages = {4606},
doi = {10.3390/buildings16224606}
}
EUVIMED