EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Seismic and Subway-Induced Vibration Dual-Control Performance of Metal Rubber–Polyurethane Composite Bearings for TOD Over-Track Buildings

Ben Sha, Junming Ma, Yifeng Wu, Aiqun Li

Buildings · 13.11.2026 · 16 (22) · 4539

DOI: 10.3390/buildings16224539 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 13.11.2026. Verfasst von Ben Sha und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To meet the engineering demand for seismic and subway-induced vibration dual control in transit-oriented development (TOD) over-track buildings, this paper proposes a metal rubber–polyurethane (MR-PU) composite bearing. Through multiple groups of vertical compression and horizontal compression–shear tests, the basic mechanical performance parameters of the bearing, such as stiffness and strength, were obtained. Subsequently, a typical over-track multi-story frame structure model was established on the ETABS platform, and the dynamic responses of the structure under fixed-base and base-isolated conditions were compared and analyzed. The results show that, in terms of vertical vibration isolation, the natural period of the structure was extended from 0.11 s for the fixed-base model to 0.20–0.24 s, weakening the acceleration response in the 40–100 Hz frequency band. In terms of horizontal seismic isolation, the natural period of the structure was extended from 0.7 s to 1.20–1.51 s. For the MR-PU-A2 configuration, the bottom-story seismic isolation ratio in the X direction was 67–74% under the three selected ground motions. Molding density and shape factor affected the bearing stiffness and energy dissipation. Within the investigated parameter range, a relatively high molding density and a moderate shape factor provided a favorable balance between vertical vibration isolation and horizontal seismic isolation. These findings provide a preliminary reference for further research and potential engineering applications of this type of dual-control bearing.

Zitieren

APA

Sha, B., Ma, J., Wu, Y., & Li, A. (2026). Seismic and Subway-Induced Vibration Dual-Control Performance of Metal Rubber–Polyurethane Composite Bearings for TOD Over-Track Buildings. Buildings, 16(22), 4539. https://doi.org/10.3390/buildings16224539

Vancouver

Sha B, Ma J, Wu Y, Li A. Seismic and Subway-Induced Vibration Dual-Control Performance of Metal Rubber–Polyurethane Composite Bearings for TOD Over-Track Buildings. Buildings. 2026;16(22):4539. doi:10.3390/buildings16224539

BibTeX
@article{Sha2026,
  author = {Sha, Ben and Ma, Junming and Wu, Yifeng and Li, Aiqun},
  title = {Seismic and Subway-Induced Vibration Dual-Control Performance of Metal Rubber–Polyurethane Composite Bearings for TOD Over-Track Buildings},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {4539},
  doi = {10.3390/buildings16224539}
}
Kostenlos starten →