EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamic Simulation and Seismic Analysis of Hillside RC Buildings Isolated by High-Damping Rubber Bearings

Abdul Ghafar Wahab, Zhong Tao, Hexiao Li, Ahmad Yamin Rasa, Tabasum Huma, Yuming Liang

Infrastructures · 10.09.2025 · 10 (9) · 239

DOI: 10.3390/infrastructures10090239 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Infrastructures, online erschienen am 10.09.2025. Verfasst von Abdul Ghafar Wahab und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the key project of China’s Ministry of Science and Technology, Key Research and Development programs (Key R&D programs) of the Department of Science and Technology of Yunnan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hillside buildings are particularly vulnerable to earthquakes owing to their structural configuration; however, research addressing this issue remains limited. This study investigates the effectiveness of high-damping rubber bearings (HDRBs) in enhancing the seismic resilience of hillside structures. Five numerical models were analyzed using non-linear time-history (NTH) analysis, including two flat-plane structures (one isolated and one with a fixed base) and three dropped-layer structures on hillside terrain (one with base isolation, one with inter-story isolation, and one with a fixed base). Deformation history integral (DHI) modeling was employed to simulate the HDRBs. Six earthquake ground motions from the PEER database and one scaled from 0.2–0.8 g were used to assess the seismic responses of the buildings. The results indicate that HDRBs significantly improved the seismic performance. The flat-plane isolated system (FIS) model achieved a nearly 90% reduction in peak roof acceleration compared to fixed-base structures. The dropped-layer isolated system (DIS) and dropped-layer inter-story isolated system (DIIS) models exhibited reductions of approximately 80% in the peak roof acceleration. Furthermore, the isolated structures demonstrated up to 78% reduction in the maximum inter-story drift, along with significant decreases in the story shear forces and overturning moments. Compared with non-isolated dropped-layer structures, the DIS and DIIS models showed reductions of 70% and 55% in the base shear force, respectively. The results highlight the efficacy of HDRBs in energy dissipation and their significant role in enhancing the seismic resilience of mountain structures.

Förderung

  • the key project of China’s Ministry of Science and Technology
  • Key Research and Development programs (Key R&D programs) of the Department of Science and Technology of Yunnan Province

Zitieren

APA

Wahab, A. G., Tao, Z., Li, H., Rasa, A. Y., Huma, T., & Liang, Y. (2025). Dynamic Simulation and Seismic Analysis of Hillside RC Buildings Isolated by High-Damping Rubber Bearings. Infrastructures, 10(9), 239. https://doi.org/10.3390/infrastructures10090239

Vancouver

Wahab AG, Tao Z, Li H, Rasa AY, Huma T, Liang Y. Dynamic Simulation and Seismic Analysis of Hillside RC Buildings Isolated by High-Damping Rubber Bearings. Infrastructures. 2025;10(9):239. doi:10.3390/infrastructures10090239

BibTeX
@article{Wahab2025,
  author = {Wahab, Abdul Ghafar and Tao, Zhong and Li, Hexiao and Rasa, Ahmad Yamin and Huma, Tabasum and Liang, Yuming},
  title = {Dynamic Simulation and Seismic Analysis of Hillside RC Buildings Isolated by High-Damping Rubber Bearings},
  journal = {Infrastructures},
  year = {2025},
  volume = {10},
  number = {9},
  pages = {239},
  doi = {10.3390/infrastructures10090239}
}
Kostenlos starten →