Experimental Study on the Seismic Performance of Exterior RC Beam-Column Joints with U-Shaped Steel-Strengthened Beams
Buildings · 02.11.2026 · 16 (21) · 4395
DOI: 10.3390/buildings16214395 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 02.11.2026. Verfasst von Qingli Lin und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research Project of Higher Education Institution in He-nan Province, International Science and Technology Cooperation Project of Henan Province, Open Research Fund of the Key Laboratory of Water Engineering Materials of Ministry of Water Resources, China Institute of Water Resources and Hydropower Resea….
Abstract (Originalsprache)
U-shaped steel strengthening can substantially enhance the mechanical performance of reinforced concrete (RC) beams while having minimal impact on their cross-sectional dimensions and self-weight. However, the influence of strengthening RC beams with U-shaped steel casing on the overall seismic performance of frame joints remains insufficiently investigated through experimental studies. To address this gap, four exterior beam-column joint specimens were tested under quasi-static cyclic loading without column axial load. The specimens comprised one reference specimen and three specimens with U-shaped steel-strengthened RC beams, with the U-shaped steel plate thickness as the primary variable. The failure modes, hysteretic behavior, load-carrying capacity, deformation response, stiffness degradation and energy dissipation performance were evaluated. The results showed that all specimens exhibited plastic-hinge-dominated failures at the beam ends, while U-shaped steel strengthening provided only limited improvement in the overall lateral load-carrying capacity. Compared with the reference specimen, the strengthened specimens exhibited fuller hysteretic loops and improved energy dissipation performance at large drift ratios. At a drift ratio of 6%, the energy dissipated per hysteretic loop by specimens SJ1, SJ2, and SJ3 increased by 6.5%, 14.3%, and 8.1%, respectively, compared with the reference specimen NJ1. The corresponding equivalent viscous damping coefficients increased by 15.4%, 16.5%, and 8.9%, respectively. The average test-termination-based displacement ratios of the strengthened specimens exceeded 3.2, indicating considerable deformation capacity up to the prescribed termination drift ratio of 8%.
Förderung
- Key Research Project of Higher Education Institution in He-nan Province
- International Science and Technology Cooperation Project of Henan Province
- Open Research Fund of the Key Laboratory of Water Engineering Materials of Ministry of Water Resources, China Institute of Water Resources and Hydropower Resea…
Zitieren
APA
Lin, Q., Wu, J., Fan, C., Liu, T., Wang, Y., & Han, W. (2026). Experimental Study on the Seismic Performance of Exterior RC Beam-Column Joints with U-Shaped Steel-Strengthened Beams. Buildings, 16(21), 4395. https://doi.org/10.3390/buildings16214395
Vancouver
Lin Q, Wu J, Fan C, Liu T, Wang Y, Han W. Experimental Study on the Seismic Performance of Exterior RC Beam-Column Joints with U-Shaped Steel-Strengthened Beams. Buildings. 2026;16(21):4395. doi:10.3390/buildings16214395
BibTeX
@article{Lin2026,
author = {Lin, Qingli and Wu, Junyi and Fan, Chuanhao and Liu, Tiantian and Wang, Yanfeng and Han, Wenxiang},
title = {Experimental Study on the Seismic Performance of Exterior RC Beam-Column Joints with U-Shaped Steel-Strengthened Beams},
journal = {Buildings},
year = {2026},
volume = {16},
number = {21},
pages = {4395},
doi = {10.3390/buildings16214395}
}
EUVIMED