EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Seismic Behavior of Π-Shaped Connector RC Beam–Column Joints: Experimental and Numerical Investigation

Jian Wu, Shi’en Zhang, Changhao Wei, Liangjie Hu, Jianhui Wang, Weigao Ding

Buildings · 12.07.2026 · 16 (14) · 2764

DOI: 10.3390/buildings16142764 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 12.07.2026. Verfasst von Jian Wu und 5 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Research Foundation for High-Level Talents, Shaanxi Provincial Department of Education Government-Enterprise Joint Funding Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Numerous existing RC frame buildings in China suffer from seismic deficiencies. This paper proposes a novel Π-shaped connector connection joint for the rapid strengthening of existing beam–column joints: steel plates are wrapped around existing columns, and Π-shaped connectors are welded to link new beam reinforcement. Quasi-static cyclic loading tests were conducted on one RC reference specimen and three strengthened specimens. The strengthened joints showed varying performance—two specimens (JGJ1 and JGJ2) exhibited peak loads below the RC reference, while the best specimen (JGJ3) achieved 9.8% enhancement in peak load and a nearly threefold increase in cumulative energy dissipation. The failure mode transitioned from brittle concrete crushing in the RC specimen to weld cracking and bolt fracture in the strengthened joints, thereby preserving the integrity of the core concrete. Finite element models were established using ABAQUS and validated against the test data. A parametric study investigated the effects of bolt quantity, beam and column dimensions, concrete strength, and steel plate thickness. The FE results indicate that increasing beam height from 400 mm to 450 mm yields the most significant improvement, with peak load increasing by up to 15.59% relative to the base parametric model. Favorable seismic performance was achieved with column concrete grade C50, beam concrete grade C40, steel plate thickness of 6 mm, eight bolts, and connector thickness of 6 mm. The proposed connection provides a potential strengthening alternative for existing RC frame structures.

Förderung

  • Scientific Research Foundation for High-Level Talents
  • Shaanxi Provincial Department of Education Government-Enterprise Joint Funding Project

Zitieren

APA

Wu, J., Zhang, S., Wei, C., Hu, L., Wang, J., & Ding, W. (2026). Seismic Behavior of Π-Shaped Connector RC Beam–Column Joints: Experimental and Numerical Investigation. Buildings, 16(14), 2764. https://doi.org/10.3390/buildings16142764

Vancouver

Wu J, Zhang S, Wei C, Hu L, Wang J, Ding W. Seismic Behavior of Π-Shaped Connector RC Beam–Column Joints: Experimental and Numerical Investigation. Buildings. 2026;16(14):2764. doi:10.3390/buildings16142764

BibTeX
@article{Wu2026,
  author = {Wu, Jian and Zhang, Shi’en and Wei, Changhao and Hu, Liangjie and Wang, Jianhui and Ding, Weigao},
  title = {Seismic Behavior of Π-Shaped Connector RC Beam–Column Joints: Experimental and Numerical Investigation},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {14},
  pages = {2764},
  doi = {10.3390/buildings16142764}
}
Kostenlos starten →