Geometry-Driven Parametric Modeling of Reinforcement in Variable-Section Special-Shaped Columns Using BIM
Buildings · 27.10.2026 · 16 (21) · 4283
DOI: 10.3390/buildings16214283 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 27.10.2026. Verfasst von Yingjie Liu und 3 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Automated reinforcement modeling of variable-section special-shaped columns remains challenging because sectional variation simultaneously affects longitudinal-bar trajectories and stirrup configurations. This study proposes a geometry-driven parametric BIM method in which section dimensions and reinforcement-detailing parameters are mapped to reinforcement control points. Longitudinal bars in stable regions are represented by two endpoints, while those crossing the transition region are described using multi-control-point trajectories. Stirrup coordinates are updated with elevation to maintain geometric compatibility with inclined longitudinal reinforcement. The method was implemented in Autodesk Revit 2020 using C# and the Revit API and applied to L-, T-, cross-, and Z-shaped variable-section columns. Quantitative validation showed a mean spatial deviation of 0.161 mm across 264 representative control points, while the proposed workflow achieved a mean case-specific modeling-time reduction of 93.03% compared with conventional manual modeling. Reinforcement length and quantity outputs were also consistent with independent calculations. An engineering application further illustrated the use of the proposed workflow in a practical project context. The proposed framework provides an efficient and extensible approach for coordinated reinforcement generation and BIM-based information output in regular variable-section special-shaped columns.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Liu, Y., Liu, Q., Li, H., & Li, S. (2026). Geometry-Driven Parametric Modeling of Reinforcement in Variable-Section Special-Shaped Columns Using BIM. Buildings, 16(21), 4283. https://doi.org/10.3390/buildings16214283
Vancouver
Liu Y, Liu Q, Li H, Li S. Geometry-Driven Parametric Modeling of Reinforcement in Variable-Section Special-Shaped Columns Using BIM. Buildings. 2026;16(21):4283. doi:10.3390/buildings16214283
BibTeX
@article{Liu2026,
author = {Liu, Yingjie and Liu, Qinghe and Li, Hongmei and Li, Shushan},
title = {Geometry-Driven Parametric Modeling of Reinforcement in Variable-Section Special-Shaped Columns Using BIM},
journal = {Buildings},
year = {2026},
volume = {16},
number = {21},
pages = {4283},
doi = {10.3390/buildings16214283}
}
EUVIMED