Elastic buckling of monosymmetric I‐shaped section beam‐columns under unequal end moments
ce/papers · 2026-09 · 9 (2-3) · 1954-1959
DOI: 10.1002/cepa.70384 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Anna Barszcz und 2 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben.
Abstract (Originalsprache)
Modern design methods of steel beam‐columns, such as the General Method of Eurocode 3, utilize solutions of the elastic flexural‐torsional buckling of beam‐columns that have generally been limited to bisymmetric I‐shaped section elements. Such solutions cover the whole domain of the possible design situations in which there is a different proportion between the maximum bending moment and the compressive axial force. The proposed paper tends to widen the scope of applications of the General Method of Eurocode 3 in the domain of elastic buckling of monosymmetric I‐shape section beam‐columns. A general case of asymmetric loading that results from the unequal end moments is taken into consideration. For such design situations, the stress state in flanges may change along the member length from that of the bigger flange being in compression to that of the smaller flange being in compression. The solution presented in the analytical proposal presented herein accounts for the secondary flexural and torsional effects on the critical state but neglects the higher order terms of the Wagner effect. In case of a symmetric loading pattern, it has been observed that when the flange of a greater section is more stressed in compression, the flexural‐torsional buckling compressive force may exceed its critical value. A particular authors' task herein is to prove or disprove the hypothesis that such an observation may also exist for beam‐columns under a general loading pattern. The analytical solution developed by authors is based on the assumption of dividing any general loading pattern into symmetric and antisymmetric components. This approach led to a general analytical solution that is verified by numerical results from the LTBeamN software and other analytical solutions presented in the subject literature. Conclusions for practical applications of presented analytical results are drawn.
Zitieren
APA
Barszcz, A., Gizejowski, M., & Wojcik‐Grzaba, I. (2026). Elastic buckling of monosymmetric I‐shaped section beam‐columns under unequal end moments. ce/papers, 9(2-3), 1954-1959. https://doi.org/10.1002/cepa.70384
Vancouver
Barszcz A, Gizejowski M, Wojcik‐Grzaba I. Elastic buckling of monosymmetric I‐shaped section beam‐columns under unequal end moments. ce/papers. 2026;9(2-3):1954-1959. doi:10.1002/cepa.70384
BibTeX
@article{Barszcz2026,
author = {Barszcz, Anna and Gizejowski, Marian and Wojcik‐Grzaba, Izabela},
title = {Elastic buckling of monosymmetric I‐shaped section beam‐columns under unequal end moments},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {1954--1959},
doi = {10.1002/cepa.70384}
}
EUVIMED