A Component-Based Joint Model for Nonlinear Analysis of Bolted Extended End-Plate Connections
Buildings · 14.07.2026 · 16 (14) · 2787
DOI: 10.3390/buildings16142787 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 14.07.2026. Verfasst von Xiao Liu und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key Research and Development Program of China, the Doctoral Research Foundation of Southwest University of Science and Technology.
Abstract (Originalsprache)
Semi-rigid connections play a critical role in steel structures; however, most existing component-based approaches do not explicitly account for stiffness degradation and post-yield residual stiffness, which may reduce the accuracy of moment–rotation predictions. To address this limitation, direct numerical simulations (DNSs) of representative T-stub beam-to-column joints were conducted to investigate their nonlinear rotational behavior. Based on the observed joint response, a Joint Component Model (JCM) capable of representing sequential yielding, stiffness evolution, and residual rotational stiffness was developed. Constitutive relationships were derived, and a parameter identification procedure directly relating joint geometry and component mechanical properties to the model parameters was established. The proposed model was subsequently implemented in ANSYS and validated through analyses of T-stub joints and steel frames subjected to static and dynamic loading. The results showed good agreement between the JCM and DNS in terms of moment–rotation relationships, force–displacement responses, and dynamic time-history responses. Compared with DNS, the proposed model significantly reduced computational time while maintaining satisfactory prediction accuracy. The proposed JCM therefore provides an efficient and reliable component-based modeling framework for modeling semi-rigid steel connections and capturing stiffness evolution throughout the entire joint rotation process.
Förderung
- the National Key Research and Development Program of China
- the Doctoral Research Foundation of Southwest University of Science and Technology
Zitieren
APA
Liu, X., Li, Y., Yao, H., Liu, C., & Huang, L. (2026). A Component-Based Joint Model for Nonlinear Analysis of Bolted Extended End-Plate Connections. Buildings, 16(14), 2787. https://doi.org/10.3390/buildings16142787
Vancouver
Liu X, Li Y, Yao H, Liu C, Huang L. A Component-Based Joint Model for Nonlinear Analysis of Bolted Extended End-Plate Connections. Buildings. 2026;16(14):2787. doi:10.3390/buildings16142787
BibTeX
@article{Liu2026,
author = {Liu, Xiao and Li, Yilun and Yao, Haiwei and Liu, Chaoyang and Huang, Liangyin},
title = {A Component-Based Joint Model for Nonlinear Analysis of Bolted Extended End-Plate Connections},
journal = {Buildings},
year = {2026},
volume = {16},
number = {14},
pages = {2787},
doi = {10.3390/buildings16142787}
}
EUVIMED