Reliability of the Component‐Based Finite Element Method for Plate Tensile Rupture in Welded and Bolted Connections
ce/papers · 2026-09 · 9 (2-3) · 1774-1779
DOI: 10.1002/cepa.70419 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Martin Vild und 3 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The component‐based finite element method (CBFEM) has become an established tool in steel connection design, as it allows automatic generation of numerical models directly from CAD representations. In this method, the resistances of bolts, welds, anchors, and concrete in compression are determined by code formulas, while plate failure is determined by a plastic strain limit from shell finite elements. This concept fundamentally differs from the code formulas calibrated on experimental evidence. It has generally been assumed that a bilinear material model, with yielding at the design yield strength, negligible strain hardening, and a 5% equivalent plastic strain limit, provides a safe estimate of connection design resistance. However, this assumption has not yet been verified by a systematic reliability assessment across the wide range of connection types used in practice. In this study, several hundred experiments that failed via net‐section failure were gathered, modelled, and analyzed using CBFEM with experimental, nominal, and mean material properties. The model bias and coefficient of variation were quantified. Using tail approximation, extremely conservative outliers were excluded to achieve a near‐normal distribution of ratios of experimental resistances to the model resistance predictions. The model safety factor was determined to achieve the target reliability requirement specified in EN 1990.
Zitieren
APA
Vild, M., Denavit, M., Wald, F., & Taras, A. (2026). Reliability of the Component‐Based Finite Element Method for Plate Tensile Rupture in Welded and Bolted Connections. ce/papers, 9(2-3), 1774-1779. https://doi.org/10.1002/cepa.70419
Vancouver
Vild M, Denavit M, Wald F, Taras A. Reliability of the Component‐Based Finite Element Method for Plate Tensile Rupture in Welded and Bolted Connections. ce/papers. 2026;9(2-3):1774-1779. doi:10.1002/cepa.70419
BibTeX
@article{Vild2026,
author = {Vild, Martin and Denavit, Mark and Wald, František and Taras, Andreas},
title = {Reliability of the Component‐Based Finite Element Method for Plate Tensile Rupture in Welded and Bolted Connections},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {1774--1779},
doi = {10.1002/cepa.70419}
}
EUVIMED