EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Fly Ash and Slag on the Mechanical Properties of Geopolymer Concrete

Zhenyang Zhang, Tian Su, Lu Zhang, Run Zheng, Keshun Ma, Lin Zhang, Chiemela Victor Amaechi, Chunguang Wang

Buildings · 30.08.2024 · 14 (9) · 2720

DOI: 10.3390/buildings14092720 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 30.08.2024. Verfasst von Zhenyang Zhang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 93 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Natural Science Foundation Project, Key Research and Development Program of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of geopolymer as a cementitious material for geopolymer concrete (GPC) is beneficial for the sustainable development and green transformation of the construction industry. Geopolymer concrete has many advantages, such as high strength, heat and corrosion resistance, low hydration heat, and carbon emissions. This paper adopted the water–binder ratio, alkaline activator modulus, and slag replacement as the influencing factors, and used the 28-day compressive strength and flexural strength of geopolymer concrete as the response values to seek a reasonable mix design. In addition, through microstructure analysis, the mechanism of geopolymer on concrete was studied. The results indicated that as the water–binder ratio increased, the compressive strength first increased and then decreased, while the flexural strength continuously decreased. As the amount of slag replacement increased, the compressive strength and flexural strength would also increase. The effect of alkaline activator modulus on compressive strength and flexural strength was not significant. Through response surface methodology (RSM) analysis, the optimal design of geopolymer concrete was determined to have a water–cement ratio of 3.50, a modulus of 1.54 for alkaline activator solution, and a slag substitution rate of 47%. The microstructure analysis showed that the water–binder ratio and slag replacement improved the pore structure and density of concrete, thereby enhancing the macroscopic mechanical properties of concrete. This paper can provide a theoretical basis for the application of geopolymer concrete in engineering.

Förderung

  • Shandong Natural Science Foundation Project
  • Key Research and Development Program of Shandong Province

Zitieren

APA

Zhang, Z., Su, T., Zhang, L., Zheng, R., Ma, K., Zhang, L., Amaechi, C. V., & Wang, C. (2024). The Influence of Fly Ash and Slag on the Mechanical Properties of Geopolymer Concrete. Buildings, 14(9), 2720. https://doi.org/10.3390/buildings14092720

Vancouver

Zhang Z, Su T, Zhang L, Zheng R, Ma K, Zhang L, et al. The Influence of Fly Ash and Slag on the Mechanical Properties of Geopolymer Concrete. Buildings. 2024;14(9):2720. doi:10.3390/buildings14092720

BibTeX
@article{Zhang2024,
  author = {Zhang, Zhenyang and Su, Tian and Zhang, Lu and Zheng, Run and Ma, Keshun and Zhang, Lin and Amaechi, Chiemela Victor and Wang, Chunguang},
  title = {The Influence of Fly Ash and Slag on the Mechanical Properties of Geopolymer Concrete},
  journal = {Buildings},
  year = {2024},
  volume = {14},
  number = {9},
  pages = {2720},
  doi = {10.3390/buildings14092720}
}
Kostenlos starten →