Bonding Properties between Fly Ash/Slag-Based Engineering Geopolymer Composites and Concrete
Materials · 07.06.2023 · 16 (12) · 4232
DOI: 10.3390/ma16124232 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.06.2023. Verfasst von Baogui Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Yellow River Laboratory, Zhengzhou University, Zhengzhou 450001, China. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Research Projects of Henan Province.
Abstract (Originalsprache)
Concrete infrastructure repair remains a formidable challenge. The application of engineering geopolymer composites (EGCs) as a repair material in the field of rapid structural repair can ensure the safety of structural facilities and prolong their service life. However, the interfacial bonding performance of existing concrete with EGCs is still unclear. The purpose of this paper is to explore a kind of EGC with good mechanical properties, and to evaluate the bonding performance of EGCs with existing concrete using a tensile bonding test and single shear bonding test. At the same time, X-ray diffraction (XRD) and Scanning electron microscopy (SEM) were adopted to study the microstructure. The results showed that the bond strength increased with the increase in interface roughness. For polyvinyl alcohol (PVA)-fiber-reinforced EGCs, the bond strength increased with the increase in FA content (0–40%). However, with the change of FA content (20–60%), the bond strength of polyethylene (PE) fiber-reinforced EGCs have little change. The bond strength of PVA-fiber-reinforced EGCs increased with the increase in water–binder ratio (0.30–0.34), while that of PE-fiber-reinforced EGCs decreased. The bond–slip model of EGCs with existing concrete was established based on the test results. XRD studies showed that when the FA content was 20–40%, the content of C-S-H gels was high and the reaction was sufficient. SEM studies showed that when the FA content was 20%, the PE fiber–matrix bonding was weakened to a certain extent, so the ductility of EGC was improved. Besides, with the increase in the water–binder ratio (0.30–0.34), the reaction products of the PE-fiber-reinforced EGC matrix gradually decreased.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Yellow River Laboratory, Zhengzhou University, Zhengzhou 450001, China.
- Zhengzhou Metro Group Co., Ltd., Zhengzhou 450000, China.
- China Institute of Water Resources and Hydropower Research, Beijing 100038, China.
- School of Water Conservancy and Civil Engineering, Zhengzhou University, Zhengzhou 450001, China.
ORCID-Profile: Hu Feng
Förderung
- National Natural Science Foundation of China
- Science and Technology Research Projects of Henan Province
Zitieren
APA
Wang, B., Feng, H., Huang, H., Guo, A., Zheng, Y., & Wang, Y. (2023). Bonding Properties between Fly Ash/Slag-Based Engineering Geopolymer Composites and Concrete. Materials, 16(12), 4232. https://doi.org/10.3390/ma16124232
Vancouver
Wang B, Feng H, Huang H, Guo A, Zheng Y, Wang Y. Bonding Properties between Fly Ash/Slag-Based Engineering Geopolymer Composites and Concrete. Materials. 2023;16(12):4232. doi:10.3390/ma16124232
BibTeX
@article{Wang2023,
author = {Wang, Baogui and Feng, Hu and Huang, Hao and Guo, Aofei and Zheng, Yiming and Wang, Yang},
title = {Bonding Properties between Fly Ash/Slag-Based Engineering Geopolymer Composites and Concrete},
journal = {Materials},
year = {2023},
volume = {16},
number = {12},
pages = {4232},
doi = {10.3390/ma16124232}
}
EUVIMED