EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Fire Properties of Flame-Retardant Laminated Bamboo Lumber Glued with Phenol Formaldehyde and Melamine Urea Formaldehyde Adhesives

Ying He, Xiaobei Jin iD, Jingpeng Li iD, Daochun Qin

Polymers · 12.03.2024 · 16 (6) · 781

DOI: 10.3390/polym16060781 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.03.2024. Verfasst von Ying He und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomaterials, International Centre for Bamboo and Rattan, Beijing 100102, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Fundamental Research Funds of International Centre for Bamboo and Rattan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the effects of different adhesives, phenol formaldehyde (PF) and melamine urea formaldehyde (MUF), on the mechanical and fire properties of flame-retardant laminated bamboo lumber (LBL). The results demonstrated that the flame-retardant treatment using phosphorus–nitrogen–boron compounds endowed the LBL with excellent flame retardancy and smoke suppression properties, even though the bending strength and bond shear strength were slightly reduced. The PF-glued LBL exhibited superior mechanical and shear properties to the MUF-glued ones, primarily due to its higher processing temperature and deeper adhesive penetration. In addition, the MUF-glued flame-retardant LBL displayed better heat release reduction and smoke suppression properties than the PF-glued LBL, which resulted from the synergistic flame retardancy between the melamine element in MUF and the applied flame retardant. The analysis of the influence of adhesive type on the mechanical and fire properties of flame-retardant LBL holds significant importance for the future design and production of high-performance LBL material.

Schlagwörter

Stichwörter der Autor:innen

PF and MUF adhesivesflame-retardant treatmentlaminated bamboo lumbermechanical and fire properties

Autor:innen und Institutionen

  • Department of Biomaterials, International Centre for Bamboo and Rattan, Beijing 100102, China.
  • SFA and Beijing Co-Built Key Laboratory of Bamboo and Rattan Science & Technology, State Forestry, Administration, Beijing 100102, China.
  • Key Laboratory of High Efficient Processing of Bamboo of Zhejiang Province, China National Bamboo Research Center, Hangzhou 310012, China.
  • Sanya Research Base, International Centre for Bamboo and Rattan, Sanya 572000, China.

ORCID-Profile: Xiaobei Jin, Jingpeng Li

Förderung

  • National Key Research and Development Program of China
  • Fundamental Research Funds of International Centre for Bamboo and Rattan

Zitieren

APA

He, Y., Jin, X., Li, J., & Qin, D. (2024). Mechanical and Fire Properties of Flame-Retardant Laminated Bamboo Lumber Glued with Phenol Formaldehyde and Melamine Urea Formaldehyde Adhesives. Polymers, 16(6), 781. https://doi.org/10.3390/polym16060781

Vancouver

He Y, Jin X, Li J, Qin D. Mechanical and Fire Properties of Flame-Retardant Laminated Bamboo Lumber Glued with Phenol Formaldehyde and Melamine Urea Formaldehyde Adhesives. Polymers. 2024;16(6):781. doi:10.3390/polym16060781

BibTeX
@article{He2024,
  author = {He, Ying and Jin, Xiaobei and Li, Jingpeng and Qin, Daochun},
  title = {Mechanical and Fire Properties of Flame-Retardant Laminated Bamboo Lumber Glued with Phenol Formaldehyde and Melamine Urea Formaldehyde Adhesives},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {6},
  pages = {781},
  doi = {10.3390/polym16060781}
}
Kostenlos starten →