EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A High-Precision Screen-Printed Glucose Sensor with In Situ Impedance-Based HCT Correction and Temperature Compensation

Mingxin Lu, Jie Cheng iD, Qinyao Lei, Jinhong Guo iD, Kuo Chen

Biosensors · 2026

DOI: 10.3390/bios16040193 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2026. Verfasst von Mingxin Lu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Automation and Intelligent Sensing, Shanghai Jiao Tong University, Shanghai 200240, China. Hauptthemen laut MEDLINE: Biosensing Techniques, Blood Glucose. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Chongqing, China, Nation Key R&D Program of China, atural Science Foundation of Chongqing, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hematocrit (HCT) fluctuations and ambient temperature variations are two critical interference factors limiting the accuracy of electrochemical glucose test strips in self-monitoring of blood glucose (SMBG). In this study, a high-precision screen-printed glucose sensor incorporating in situ impedance-based HCT correction and temperature compensation was developed. The system employs a time-division multiplexing strategy, integrating a normalized thermodynamic model and an in situ impedance-based HCT correction algorithm, to achieve synergistic decoupling and precise compensation of temperature and HCT interferences. Experimental results demonstrate that after multi-parameter synergistic correction, the system exhibits excellent stability across a wide temperature range (10–35 °C) and a broad HCT range (10–70%). The accuracy indicators significantly surpass ISO 15197:2013 standards. In contrast, uncorrected measurements showed deviations ranging from approximately −80% to +30% due to HCT fluctuations. This multiple correction strategy effectively resolves systematic errors in whole blood testing without increasing electrode complexity or requiring pretreatment steps, providing a robust technical solution for high-precision, low-cost personal glucose monitoring.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Biosensing TechniquesBlood GlucoseTemperatureHumansElectric ImpedanceHematocritGlucoseBlood Glucose Self-MonitoringElectrodesAlgorithms

Stichwörter der Autor:innen

POCTelectrochemical glucose sensorhematocrit correctionin situ impedance measurementtemperature compensation

Substanzen

Blood GlucoseGlucose

Autor:innen und Institutionen

  • School of Automation and Intelligent Sensing, Shanghai Jiao Tong University, Shanghai 200240, China.
  • School of Computer Science and Technology, Chongqing University of Posts and Telecommunications, Chongqing 404100, China.

ORCID-Profile: Jie Cheng, Jinhong Guo

Förderung

  • Natural Science Foundation of Chongqing, China
  • Nation Key R&D Program of China
  • atural Science Foundation of Chongqing, China

Zitieren

APA

Lu, M., Cheng, J., Lei, Q., Guo, J., & Chen, K. (2026). A High-Precision Screen-Printed Glucose Sensor with In Situ Impedance-Based HCT Correction and Temperature Compensation. Biosensors. https://doi.org/10.3390/bios16040193

Vancouver

Lu M, Cheng J, Lei Q, Guo J, Chen K. A High-Precision Screen-Printed Glucose Sensor with In Situ Impedance-Based HCT Correction and Temperature Compensation. Biosensors. 2026. doi:10.3390/bios16040193

BibTeX
@article{Lu2026,
  author = {Lu, Mingxin and Cheng, Jie and Lei, Qinyao and Guo, Jinhong and Chen, Kuo},
  title = {A High-Precision Screen-Printed Glucose Sensor with In Situ Impedance-Based HCT Correction and Temperature Compensation},
  journal = {Biosensors},
  year = {2026},
  doi = {10.3390/bios16040193}
}
Kostenlos starten →