Role of en-APTAS Membranes in Enhancing the NO2 Gas-Sensing Characteristics of Carbon Nanotube/ZnO-Based Memristor Gas Sensors
Biosensors · 20.12.2024 · 14 (12) · 635
DOI: 10.3390/bios14120635 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biosensors, online erschienen am 20.12.2024. Verfasst von Ibtisam Ahmad und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Semiconductor Systems Engineering, Convergence Engineering for Intelligent Drone, Institute of Semiconductor and System IC, Sejong Univ…. Hauptthemen laut MEDLINE: Nanotubes, Carbon, Zinc Oxide, Nitrogen Dioxide, Biosensing Techniques. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT).
Abstract (Originalsprache)
NO2 is a toxic gas that can damage the lungs with prolonged exposure and contribute to health conditions, such as asthma in children. Detecting NO2 is therefore crucial for maintaining a healthy environment. Carbon nanotubes (CNTs) are promising materials for NO2 gas sensors due to their excellent electronic properties and high adsorption energy for NO2 molecules. However, conventional CNT-based sensors face challenges, including low responses at room temperature (RT) and slow recovery times. This study introduces a memristor-based NO2 gas sensor comprising CNT/ZnO/ITO decorated with an N-[3-(trimethoxysilyl)propyl] ethylene diamine (en-APTAS) membrane to enhance room-temperature-sensing performance. The amine groups in the en-APTAS membrane increase adsorption sites and boost charge transfer interactions between NO2 and the CNT surface. This modification improves the sensor’s response by 60% at 20 ppm compared to the undecorated counterpart. However, the high adsorption energy of NO2 slows the recovery process. To overcome this, a pulse-recovery method was implemented, applying a −2.5 V pulse with a 1 ms width, enabling the sensor to return to its baseline within 1 ms. These findings highlight the effectiveness of en-APTAS decoration and pulse-recovery techniques in improving the sensitivity, response, and recovery of CNT-based gas sensors.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Semiconductor Systems Engineering, Convergence Engineering for Intelligent Drone, Institute of Semiconductor and System IC, Sejong University, 209, Neungdong-ro, Gwangjin-gu, Seoul 05006, Republic of Korea.
ORCID-Profile: Hee-Dong Kim
Förderung
- National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT)
Zitieren
APA
Ahmad, I., Ali, M., & Kim, H. D. (2024). Role of en-APTAS Membranes in Enhancing the NO2 Gas-Sensing Characteristics of Carbon Nanotube/ZnO-Based Memristor Gas Sensors. Biosensors, 14(12), 635. https://doi.org/10.3390/bios14120635
Vancouver
Ahmad I, Ali M, Kim HD. Role of en-APTAS Membranes in Enhancing the NO2 Gas-Sensing Characteristics of Carbon Nanotube/ZnO-Based Memristor Gas Sensors. Biosensors. 2024;14(12):635. doi:10.3390/bios14120635
BibTeX
@article{Ahmad2024,
author = {Ahmad, Ibtisam and Ali, Mohsin and Kim, Hee-Dong},
title = {Role of en-APTAS Membranes in Enhancing the NO2 Gas-Sensing Characteristics of Carbon Nanotube/ZnO-Based Memristor Gas Sensors},
journal = {Biosensors},
year = {2024},
volume = {14},
number = {12},
pages = {635},
doi = {10.3390/bios14120635}
}
EUVIMED