EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cell Patterning Technology on Polymethyl Methacrylate through Controlled Physicochemical and Biochemical Functionalization

Enrique Azuaje-Hualde, Job Komen, Juncal A Alonso-Cabrera iD, Albert van den Berg, Marian M de Pancorbo, Andries D van der Meer iD, Fernando Benito-Lopez, Lourdes Basabe-Desmonts iD

Biosensors · 2023

DOI: 10.3390/bios13100904 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosensors, 2023. Verfasst von Enrique Azuaje-Hualde und 7 weiteren Autor:innen. Beteiligte Einrichtung: Microfluidics Cluster UPV/EHU, BIOMICs Microfluidics Group, Lascaray Research Center, University of the Basque Country UPV/EHU, 01006 Vitoria-Gasteiz…. Hauptthemen laut MEDLINE: Microfluidic Analytical Techniques. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technology, Knowledge and Innovation, Gobierno Vasco, Ministry of Science, Technology and Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, innovative cell-based biosensing systems have been developed, showing impact in healthcare and life science research. Now, there is a need to design mass-production processes to enable their commercialization and reach society. However, current protocols for their fabrication employ materials that are not optimal for industrial production, and their preparation requires several chemical coating steps, resulting in cumbersome protocols. We have developed a simplified two-step method for generating controlled cell patterns on PMMA, a durable and transparent material frequently employed in the mass manufacturing of microfluidic devices. It involves air plasma and microcontact printing. This approach allows the formation of well-defined cell arrays on PMMA without the need for blocking agents to define the patterns. Patterns of various adherent cell types in dozens of individual cell cultures, allowing the regulation of cell–material and cell–cell interactions, were developed. These cell patterns were integrated into a microfluidic device, and their viability for more than 20 h under controlled flow conditions was demonstrated. This work demonstrated the potential to adapt polymeric cytophobic materials to simple fabrication protocols of cell-based microsystems, leveraging the possibilities for commercialization.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Microfluidic Analytical TechniquesPolymethyl MethacrylatePrintingLab-On-A-Chip Devices

Stichwörter der Autor:innen

cell patterningcell-based microsystemscommercializationmicrocontact printingmicrofluidic devicepolymethyl methacrylate

Substanzen

Polymethyl Methacrylate

Autor:innen und Institutionen

  • Microfluidics Cluster UPV/EHU, BIOMICs Microfluidics Group, Lascaray Research Center, University of the Basque Country UPV/EHU, 01006 Vitoria-Gasteiz, Spain.
  • Bioaraba Health Research Institute, Microfluidics Cluster UPV/EHU, 01009 Vitoria-Gasteiz, Spain.
  • BIOS Lab on a Chip Group, MESA+ Institute for Nanotechnology, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands.
  • Microfluidics Cluster UPV/EHU, Analytical Microsystems & Materials for Lab-on-a-Chip (AMMa-LOAC) Group, Analytical Chemistry Department, University of the Basque Country UPV/EHU, 48940 Leioa, Spain.
  • BIOMICs Research Group, Lascaray Research Center, University of the Basque Country UPV/EHU, 01006 Vitoria-Gasteiz, Spain.
  • Applied Stem Cell Technologies, TechMed Centre, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands.

ORCID-Profile: Juncal A Alonso-Cabrera, Andries D van der Meer, Lourdes Basabe-Desmonts

Förderung

  • Ministry of Science, Technology, Knowledge and Innovation
  • Gobierno Vasco
  • Ministry of Science, Technology and Innovation
  • Basque Government
  • Ministerio de Ciencia y Educación de España

Zitieren

APA

Azuaje-Hualde, E., Komen, J., Alonso-Cabrera, J. A., van den Berg, A., de Pancorbo, M. M., van der Meer, A. D., Benito-Lopez, F., & Basabe-Desmonts, L. (2023). Cell Patterning Technology on Polymethyl Methacrylate through Controlled Physicochemical and Biochemical Functionalization. Biosensors. https://doi.org/10.3390/bios13100904

Vancouver

Azuaje-Hualde E, Komen J, Alonso-Cabrera JA, van den Berg A, de Pancorbo MM, van der Meer AD, et al. Cell Patterning Technology on Polymethyl Methacrylate through Controlled Physicochemical and Biochemical Functionalization. Biosensors. 2023. doi:10.3390/bios13100904

BibTeX
@article{AzuajeHualde2023,
  author = {Azuaje-Hualde, Enrique and Komen, Job and Alonso-Cabrera, Juncal A and van den Berg, Albert and de Pancorbo, Marian M and van der Meer, Andries D and Benito-Lopez, Fernando and Basabe-Desmonts, Lourdes},
  title = {Cell Patterning Technology on Polymethyl Methacrylate through Controlled Physicochemical and Biochemical Functionalization},
  journal = {Biosensors},
  year = {2023},
  doi = {10.3390/bios13100904}
}
Kostenlos starten →