EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Three-Dimensional Printing of Bioinspired Hierarchical Structures for Enhanced Fog Collection Efficiency in 3D Space via Vat Photopolymerization

Daleanna Charoensook, Shah Md Ashiquzzaman Nipu iD, Ana Girish, Qingqing He iD, Shan Cheng, Kevin Chapman, Nathan Xie, Cindy Xiangjia Li iD, Yang Yang

Biomimetics · 03.12.2024 · 9 (12) · 734

DOI: 10.3390/biomimetics9120734 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 03.12.2024. Verfasst von Daleanna Charoensook und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, San Diego State University, San Diego, CA 92182, USA. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, Arizona State University, San Diego State University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Collecting fog water is crucial for dry areas since natural moisture and fog are significant sources of freshwater. Sustainable and energy-efficient water collection systems can take a page out of the cactus’s playbook by mimicking its native fog gathering process. Inspired by the unique geometric structure of the cactus spine, we fabricated a bioinspired artificial fog collector consisting of cactus spines featuring barbs of different sizes and angles on the surfaces for water collection and a series of microcavities within microchannels inspired by Nepenthes Alata on the bottom to facilitate water flowing to the reservoir. However, replicating the actual shape of the cactus spine using conventional manufacturing techniques is challenging, and research in this area has faced a limitation in enhancing water-collecting efficiency. Here, we turned to 3D printing technology (vat photopolymerization) to create bio-mimetic fog collectors with a variety of geometric shapes that would allow for the most effective conveyance and gathering of water. Various barb sizes, angles between each barb in a single array, spine and barb arrangements, and quantity of barbs were tested experimentally and numeric analysis was carried out to measure the volume of water collected and optimize the mass rate. The result shows that optimal fog collection is with a mass flow rate of 0.7433 g/min, with Li = 900 μm, θ = 45°, ϕ = 90°, Nb = 2, and Ns = 5. This study presents a sustainable and ecologically sound method for efficiently collecting humid air, which is expected to be advantageous for the advancement of future-oriented fog-collection, water-transportation, and separation technologies.

Schlagwörter

Stichwörter der Autor:innen

3D printingbiomimeticsfog collectionhierarchical structuresvat photopolymerization

Autor:innen und Institutionen

  • Department of Mechanical Engineering, San Diego State University, San Diego, CA 92182, USA.
  • School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, AZ 85287, USA.
  • Canyon Crest Academy, San Diego, CA 92130, USA.
  • Westview High School, San Diego, CA 92130, USA.

ORCID-Profile: Shah Md Ashiquzzaman Nipu, Qingqing He, Cindy Xiangjia Li

Förderung

  • National Science Foundation
  • Arizona State University
  • San Diego State University

Zitieren

APA

Charoensook, D., Nipu, S. M. A., Girish, A., He, Q., Cheng, S., Chapman, K., Xie, N., Li, C. X., & Yang, Y. (2024). Three-Dimensional Printing of Bioinspired Hierarchical Structures for Enhanced Fog Collection Efficiency in 3D Space via Vat Photopolymerization. Biomimetics, 9(12), 734. https://doi.org/10.3390/biomimetics9120734

Vancouver

Charoensook D, Nipu SMA, Girish A, He Q, Cheng S, Chapman K, et al. Three-Dimensional Printing of Bioinspired Hierarchical Structures for Enhanced Fog Collection Efficiency in 3D Space via Vat Photopolymerization. Biomimetics. 2024;9(12):734. doi:10.3390/biomimetics9120734

BibTeX
@article{Charoensook2024,
  author = {Charoensook, Daleanna and Nipu, Shah Md Ashiquzzaman and Girish, Ana and He, Qingqing and Cheng, Shan and Chapman, Kevin and Xie, Nathan and Li, Cindy Xiangjia and Yang, Yang},
  title = {Three-Dimensional Printing of Bioinspired Hierarchical Structures for Enhanced Fog Collection Efficiency in 3D Space via Vat Photopolymerization},
  journal = {Biomimetics},
  year = {2024},
  volume = {9},
  number = {12},
  pages = {734},
  doi = {10.3390/biomimetics9120734}
}
Kostenlos starten →