EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Energy Absorption Performance of Triply Periodic Minimal Surface (TPMS) Structures at Different Load-Bearing Angles

Yongtao Lyu iD, Tingxiang Gong, Tao He, Hao Wang, Michael Zhuravkov, Yang Xia iD

Biomimetics · 27.06.2024 · 9 (7) · 392

DOI: 10.3390/biomimetics9070392 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 27.06.2024. Verfasst von Yongtao Lyu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Fund of Science and Technology on Thermal Energy and Power Laboratory, The DUT-BSU joint research grant, DUT-BSU joint research grant.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As engineering demands for structural energy absorption intensify, triply periodic minimal surface (TPMS) structures, known for their light weight and exceptional energy absorption, are increasingly valued in aerospace, automotive, and shipping engineering. In this study, the energy absorption performance of three typical TPMS structures was evaluated (i.e., Gyroid, Diamond, and IWP) using quasi-static compression tests at various load-bearing angles. The results showed that while there is little influence of load-bearing angles on the energy absorption performance of Gyroid structures, its energy absorption is the least of the three structures. In contrast, Diamond structures have notable fluctuation in energy absorption at certain angles. Moreover, IWP (I-graph and Wrapped Package-graph) structures, though highly angle-sensitive, achieve the highest energy absorption. Further analysis of deformation behaviors revealed that structures dominated by bending deformation are stable under multi-directional loads but less efficient in energy absorption. Conversely, structures exhibiting mainly tensile deformation, despite their load direction sensitivity, perform best in energy absorption. By integrating bending and tensile deformations, energy absorption was enhanced through a multi-stage platform response. The data and conclusions revealed in the present study can provide valuable insights for future applications of TPMS structures.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingdifferent load-bearing anglesenergy absorptionquasi-static compressiontriply periodic minimal surface

Autor:innen und Institutionen

  • Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China.
  • DUT-BSU Joint Institute, Dalian University of Technology, Dalian 116024, China.
  • Wuhan Second Ship Design and Research Institute, Wuhan 430205, China.
  • Faculty of Mechanics and Mathematics, Belarusian State University, 220030 Minsk, Belarus.

ORCID-Profile: Yongtao Lyu, Yang Xia

Förderung

  • Open Fund of Science and Technology on Thermal Energy and Power Laboratory
  • The DUT-BSU joint research grant
  • DUT-BSU joint research grant

Zitieren

APA

Lyu, Y., Gong, T., He, T., Wang, H., Zhuravkov, M., & Xia, Y. (2024). Study on the Energy Absorption Performance of Triply Periodic Minimal Surface (TPMS) Structures at Different Load-Bearing Angles. Biomimetics, 9(7), 392. https://doi.org/10.3390/biomimetics9070392

Vancouver

Lyu Y, Gong T, He T, Wang H, Zhuravkov M, Xia Y. Study on the Energy Absorption Performance of Triply Periodic Minimal Surface (TPMS) Structures at Different Load-Bearing Angles. Biomimetics. 2024;9(7):392. doi:10.3390/biomimetics9070392

BibTeX
@article{Lyu2024,
  author = {Lyu, Yongtao and Gong, Tingxiang and He, Tao and Wang, Hao and Zhuravkov, Michael and Xia, Yang},
  title = {Study on the Energy Absorption Performance of Triply Periodic Minimal Surface (TPMS) Structures at Different Load-Bearing Angles},
  journal = {Biomimetics},
  year = {2024},
  volume = {9},
  number = {7},
  pages = {392},
  doi = {10.3390/biomimetics9070392}
}
Kostenlos starten →