EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Review of Triply Periodic Minimal Surface (TPMS) Structures for Cooling Heat Sinks

Khaoula Amara, Mohamad Ziad Saghir, Ridha Abdeljabar

Energies · 16.09.2025 · 18 (18) · 4920

DOI: 10.3390/en18184920 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 16.09.2025. Verfasst von Khaoula Amara und 2 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSERC.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This review paper deals with Triply Periodic Minimal Surfaces (TPMS) and lattice structures as a new generation of heat exchangers. Especially, their manufacturing is becoming feasible with technological progress. While some intricate structures are fabricated, challenges persist concerning manufacturing limitations, cost-effectiveness, and performance under transient operating conditions. Studies reported that these complex geometries, such as diamond, gyroid, and hexagonal lattices, outperform traditional finned and porous materials in thermal management, particularly under forced and turbulent convection regimes. However, TPMS necessitates the optimization of geometric parameters such as cell size, porosity, and topology stretching. The complex geometries enhance uniform heat exchange and reduce thermal boundary layers. Moreover, the integration of high thermal conductivity materials (e.g., aluminum and silver) and advanced coolants (including nanofluids and ethylene glycol mixtures) further improves performance. However, the drawback of complex geometries, confirmed by both numerical and experimental investigations, is the critical trade-off between heat transfer performance and pressure drop. The potential of TPMS-based heatsinks transpires as a trend for next-generation thermal management systems, besides identifying key directions for future research, including design optimization, Multiphysics modeling, and practical implementation.

Förderung

  • NSERC

Zitieren

APA

Amara, K., Saghir, M. Z., & Abdeljabar, R. (2025). Review of Triply Periodic Minimal Surface (TPMS) Structures for Cooling Heat Sinks. Energies, 18(18), 4920. https://doi.org/10.3390/en18184920

Vancouver

Amara K, Saghir MZ, Abdeljabar R. Review of Triply Periodic Minimal Surface (TPMS) Structures for Cooling Heat Sinks. Energies. 2025;18(18):4920. doi:10.3390/en18184920

BibTeX
@article{Amara2025,
  author = {Amara, Khaoula and Saghir, Mohamad Ziad and Abdeljabar, Ridha},
  title = {Review of Triply Periodic Minimal Surface (TPMS) Structures for Cooling Heat Sinks},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {18},
  pages = {4920},
  doi = {10.3390/en18184920}
}
Kostenlos starten →