EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Topography of Thermoplastic Appliance Materials Related to Sorption and Solubility in Artificial Saliva

Liliana Porojan iD, Flavia Roxana Toma iD, Mihaela Ionela Gherban iD, Roxana Diana Vasiliu, Anamaria Matichescu iD

Biomimetics · 23.06.2024 · 9 (7) · 379

DOI: 10.3390/biomimetics9070379 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 23.06.2024. Verfasst von Liliana Porojan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dental Prostheses Technology (Dental Technology), Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VICTOR BABES UNIVERSITY OF MEDICINE AND PHARMACY TIMISOARA.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

(1)

Background

PETG (polyethylene terephthalate glycol) is a transparent, inexpensive, and versatile thermoplastic biomaterial, and it is increasingly being used for a variety of medical applications in dentistry, orthopedics, tissue engineering, and surgery. It is known to have remarkable properties such as tensile strength, high ductility, and resistance to chemical insults and heat, but it can be affected by various environmental conditions. The aim of the present study was to evaluate the topographical characteristics of four thermoplastic dental appliance materials in relation to water sorption in simulated oral environments (artificial saliva samples with different pH values). (2)

Methods

The following four types of PETG clear thermoplastic materials were selected for the present study: Leone (L), Crystal (C), Erkodur (E), and Duran (D). In relation to the desiccation and water-uptake stages, their water sorption (Wsp) and solubility (Wsl) were calculated, and the surface topographies were analyzed on two length scales. The surface roughness was determined using a contact profilometer, and nanoroughness measurements were generated by three-dimensional profiles using an atomic force microscope (AFM). Statistical analyses (one-way ANOVA and unpaired and paired Student t-tests) were performed. (3)

Results

After saliva immersion, the weights of all samples increased, and the highest sorption was recorded in a basic environment. Among the materials, the water uptake for the L samples was the highest, and for E, it was the lowest. In relation to water solubility, significant values were registered for both the L and C samples’ materials. After immersion and desiccation, a decreasing trend in microroughness was observed. The AFM high-resolution images reflected more irregular surfaces related to saliva immersion. (4)

Conclusions

The sorption rates recorded in water-based artificial saliva were higher for basic pH levels, with significant differences between the samples. There were also significant differences related to the behaviors of the materials included in the study. In relation to roughness, on a microscale, the surfaces tended to be smoother after the saliva immersions, and on a nanoscale, they became more irregular.

Schlagwörter

Stichwörter der Autor:innen

artificial salivasolubilitysorptionsurface topographythermoplastic appliance

Autor:innen und Institutionen

  • Department of Dental Prostheses Technology (Dental Technology), Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine, "Victor Babeș" University of Medicine and Pharmacy Timișoara, Eftimi…
  • National Institute for Research and Development in Electrochemistry and Condensed Matter, 300569 Timisoara, Romania.
  • Department of Preventive, Community Dentistry and Oral Health, Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine, "Victor Babes" University of Medicine and Pharmacy Timișoara, Eftimie…

ORCID-Profile: Liliana Porojan, Flavia Roxana Toma, Mihaela Ionela Gherban, Anamaria Matichescu

Förderung

  • VICTOR BABES UNIVERSITY OF MEDICINE AND PHARMACY TIMISOARA

Zitieren

APA

Porojan, L., Toma, F. R., Gherban, M. I., Vasiliu, R. D., & Matichescu, A. (2024). Surface Topography of Thermoplastic Appliance Materials Related to Sorption and Solubility in Artificial Saliva. Biomimetics, 9(7), 379. https://doi.org/10.3390/biomimetics9070379

Vancouver

Porojan L, Toma FR, Gherban MI, Vasiliu RD, Matichescu A. Surface Topography of Thermoplastic Appliance Materials Related to Sorption and Solubility in Artificial Saliva. Biomimetics. 2024;9(7):379. doi:10.3390/biomimetics9070379

BibTeX
@article{Porojan2024,
  author = {Porojan, Liliana and Toma, Flavia Roxana and Gherban, Mihaela Ionela and Vasiliu, Roxana Diana and Matichescu, Anamaria},
  title = {Surface Topography of Thermoplastic Appliance Materials Related to Sorption and Solubility in Artificial Saliva},
  journal = {Biomimetics},
  year = {2024},
  volume = {9},
  number = {7},
  pages = {379},
  doi = {10.3390/biomimetics9070379}
}
Kostenlos starten →