Multi-Joint Bionic Mechanism Based on Non-Circular Gear Drive
Biomimetics · 27.06.2023 · 8 (3) · 272
DOI: 10.3390/biomimetics8030272 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 27.06.2023. Verfasst von Dawei Liu und 2 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Graduate Innovation Funding Project of Hebei Province, Natural Science Foundation of Hebei Province.
Abstract (Originalsprache)
Aiming at the nonlinear expansion/contraction drive problem between different cables in multi-joint cable drive mechanisms, a mechanical drive method based on a non-circular gear drive was proposed, which could replace the servo-sensing control system and minimize the system’s complexity and cost. A multi-joint single-degree-of-freedom (DOF) bending mechanism was constructed with several T-shaped components and cross-shaped components. The principle of the multi-joint mechanism driven by non-circular gears was clarified. The corresponding relationships between the joint bending angle, cables’ extension/retraction amount and non-circular gear transmission ratio were established. Using the Bowden cable driving, a multi-DOF bending mechanism decoupling scheme was proposed. Considering the adverse effect of non-circular gear hysteresis on the motion of multi-joint mechanisms, a non-circular gear backlash elimination method was proposed. The expression of the backlash of the non-circular gear with respect to the axial movement amount was deduced, which could enable the precise control of the backlash. A two-DOF multi-joint bionic mechanism driven by the non-circular gear was developed. The experimental results show that the mechanism can achieve coordinated bending motion by precisely controlling the line extension/contraction through non-circular gears. This multi-joint bionic mechanism driven by non-circular gears has the characteristics of reliable structure and simple control, and it is expected to be applied to bionic fish and bionic quadruped robots in the future.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China.
- National Engineering Technology Research Center of Cold Rolling Strip Equipment and Technology, Yanshan University, Qinhuangdao 066004, China.
ORCID-Profile: Dawei Liu
Förderung
- Graduate Innovation Funding Project of Hebei Province
- Natural Science Foundation of Hebei Province
Zitieren
APA
Liu, D., Zhang, T., & Cao, Y. (2023). Multi-Joint Bionic Mechanism Based on Non-Circular Gear Drive. Biomimetics, 8(3), 272. https://doi.org/10.3390/biomimetics8030272
Vancouver
Liu D, Zhang T, Cao Y. Multi-Joint Bionic Mechanism Based on Non-Circular Gear Drive. Biomimetics. 2023;8(3):272. doi:10.3390/biomimetics8030272
BibTeX
@article{Liu2023,
author = {Liu, Dawei and Zhang, Tao and Cao, Yuetong},
title = {Multi-Joint Bionic Mechanism Based on Non-Circular Gear Drive},
journal = {Biomimetics},
year = {2023},
volume = {8},
number = {3},
pages = {272},
doi = {10.3390/biomimetics8030272}
}
EUVIMED