JAMS: A high-dexterity 3-DoF bionic joint actuator with multi-drive hierarchical output and spherical rotation mechanism
The International Journal of Robotics Research · 26.10.2026
DOI: 10.1177/02783649261495976 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Robotics Research, online erschienen am 26.10.2026. Verfasst von Xuhang Li und 6 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China, Natural Science Foundation of Beijing Municipality.
Abstract (Originalsprache)
Achieving anthropomorphic agility in robotic systems remains a fundamental challenge, heavily constrained by the mechanical limitations of conventional serial-link actuators. Current joint architectures suffer from an inherent trade-off between torque density, structural compactness, and kinematic singularity, failing to replicate the complex and coupled spherical motion of biological joints. To bridge this gap, this paper proposes a high-dexterity 3-DoF dexterous joint actuator (JAMS) by in-depth mimicking the bionic advantages of the human hip. Unlike traditional decoupled designs, JAMS introduces a load-adaptive hierarchical actuation strategy that synthesizes power from three parallel motors via customized differential bevel gear and spherical gear trains. This architecture enables omnidirectional rotation around a spatially fixed center, effectively resolving the kinematic redundancy and structural bulkiness of serial equivalents. A comprehensive kinematic model is derived to map the complex gear coupling, facilitating the development of an effectively singularity-free motion control algorithm implemented on a custom dual-MCU embedded controller board. Experimental results demonstrate that JAMS achieves an extensive operational space of 360 ° × 250 °×360° and a theoretical rated torque of 21.5 N·m, exhibiting high torque density within a compact volume. Trajectory tracking experiments verify the actuator’s capability to track selected human hip reference trajectories under scaled-duration gait-cycle conditions, with a composite kinematic-fidelity score of 95.1%, demonstrating its fundamental kinematic feasibility. By integrating multi-drive hierarchical output and spherical rotation mechanism, this work presents a validated mechatronic solution that overcomes long-standing engineering bottlenecks, offering a modularized architecture for multi-DoF robotic joint design, with potential relevance to humanoid robots, robotic arms, and future wearable mechanisms.
Förderung
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China
- Natural Science Foundation of Beijing Municipality
Zitieren
APA
Li, X., Ma, Q., Liu, Y., Chai, Z., Li, Z., Tao, C., & Fan, Y. (2026). JAMS: A high-dexterity 3-DoF bionic joint actuator with multi-drive hierarchical output and spherical rotation mechanism. The International Journal of Robotics Research. https://doi.org/10.1177/02783649261495976
Vancouver
Li X, Ma Q, Liu Y, Chai Z, Li Z, Tao C, et al. JAMS: A high-dexterity 3-DoF bionic joint actuator with multi-drive hierarchical output and spherical rotation mechanism. The International Journal of Robotics Research. 2026. doi:10.1177/02783649261495976
BibTeX
@article{Li2026,
author = {Li, Xuhang and Ma, Qingchuan and Liu, Yuyao and Chai, Zhiyuan and Li, Zhenyi and Tao, Chunjing and Fan, Yubo},
title = {JAMS: A high-dexterity 3-DoF bionic joint actuator with multi-drive hierarchical output and spherical rotation mechanism},
journal = {The International Journal of Robotics Research},
year = {2026},
doi = {10.1177/02783649261495976}
}
EUVIMED