Borate-Based Bioactive Glass Powders for 3D Printing of Biomimetic Resorbable Bone Implants
Biomimetics · 07.08.2026 · 11 (8) · 564
DOI: 10.3390/biomimetics11080564 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 07.08.2026. Verfasst von Yoann Matagne und 7 weiteren Autor:innen. Beteiligte Einrichtung: Group for Research in Energy and Environment from Materials (GREEnMat), University of Liège, Quartier Agora-B6a, Allée du Six-Août 13, 4000 Liège, Be…. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
As the population ages, the demand for customizable, resorbable bone implants in tissue engineering has intensified, outstripping the limitations of traditional autografts and allografts. While silicate-based bioactive glasses dominate bioactive glass research, borate-based bioactive glasses (BBGs) present distinct biomimetic advantages due to their accelerated degradation kinetics and superior ion-release profiles. However, producing highly pure, homogeneous BBG powders tailored for additive manufacturing remains a severe bottleneck. This study reports the development of a highly efficient synthesis protocol and subsequent Digital Light Processing (DLP) 3D printing of BBG scaffolds. An aqueous-based precursor mixture was processed via spray drying and a customized multi-stage thermal pretreatment sequence up to 800 °C to mitigate material loss, minimize oxide evaporation, and completely eliminate carbonates. Subsequent “flash melting” at 1150 °C for 20 min yielded an amorphous, high-purity borate–phosphate glass network (68.1B2O3-3.8Na2O-18.9CaO-4.9MgO-4.3P2O5, in wt%). Differential scanning calorimetry (DSC) revealed a glass transition temperature (Tg) of 625 °C, while in situ X-ray diffraction localized the onset of crystal nucleation between 706 °C and 723 °C. Following fine planetary milling to achieve a highly dense particle packing distribution (Dv50 = 5.4 µm, Dn50 = 0.6 µm), the optimized BBG powder was successfully loaded into an acrylate-based photosensitive slurry (51.2 wt% solid loading) to manufacture complex 3D biomimetic gyroid scaffolds via DLP. While the structural feasibility of printing high-resolution gyroid porous architectures is validated, post-printing evaluation highlighted a narrow thermal processing window; sintering at 660 °C optimized particle coalescence while minimizing microstructural de-densification caused by closed porosity expansion (which reaches 48.4% at 675 °C). This scalable synthesis-to-printing workflow offers a crucial steppingstone toward next-generation fully resorbable bone tissue scaffolds.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Group for Research in Energy and Environment from Materials (GREEnMat), University of Liège, Quartier Agora-B6a, Allée du Six-Août 13, 4000 Liège, Belgium.
- GeMMe (Georesources, Mineral Engineering & Extractive Metallurgy), University of Liège, 4000 Liège, Belgium.
ORCID-Profile: Guillaume Marchal, Damien Coibion, Nicolas Somers
Zitieren
APA
Matagne, Y., Marchal, G., Coibion, D., Blasutig, S., Lambert, F., Boschini, F., Cloots, R., & Somers, N. (2026). Borate-Based Bioactive Glass Powders for 3D Printing of Biomimetic Resorbable Bone Implants. Biomimetics, 11(8), 564. https://doi.org/10.3390/biomimetics11080564
Vancouver
Matagne Y, Marchal G, Coibion D, Blasutig S, Lambert F, Boschini F, et al. Borate-Based Bioactive Glass Powders for 3D Printing of Biomimetic Resorbable Bone Implants. Biomimetics. 2026;11(8):564. doi:10.3390/biomimetics11080564
BibTeX
@article{Matagne2026,
author = {Matagne, Yoann and Marchal, Guillaume and Coibion, Damien and Blasutig, Sébastien and Lambert, Fanny and Boschini, Frederic and Cloots, Rudi and Somers, Nicolas},
title = {Borate-Based Bioactive Glass Powders for 3D Printing of Biomimetic Resorbable Bone Implants},
journal = {Biomimetics},
year = {2026},
volume = {11},
number = {8},
pages = {564},
doi = {10.3390/biomimetics11080564}
}
EUVIMED