EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Bioinspired Flexible Pressure Sensor with High Linearity Based on a Three-Dimensional Porous Structure

Xingze Chen, Xin Wang, Huansheng Wu, Cong Wang, Yonghua Wang, Linpeng Liu iD, Ji'an Duan

Biomimetics · 29.05.2026 · 11 (6) · 376

DOI: 10.3390/biomimetics11060376 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 29.05.2026. Verfasst von Xingze Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South Univ…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Open Project Program of Key Laboratory for Cross-Scale Micro and Nano Manufacturing, Ministry of Education, Changchun University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible pressure sensors with a porous architecture are highly desirable for wearable health monitoring and intelligent human–machine interaction, owing to their excellent comfort and conformability to human motion. However, conventional porous sensors often suffer from poor signal accuracy and unstable output, which limit their capability for precision sensing. To address these challenges, we designed and fabricated a flexible pressure sensor with exceptional linearity by mimicking the unique surface structure of Iron Cross Begonia (Begonia masoniana) leaves. The sensor is constructed using a readily available melamine foam as the backbone: a porous sensing scaffold is first obtained via a simple dip-coating process, and a film featuring bioinspired protrusions is fabricated by repeated replica molding. Lamination of these two components yields a stacked sensor device. Characterization demonstrates that the sensor achieves a broad pressure detection range of up to 350 kPa, with a minimum resolvable pressure of 250 Pa, and exhibits an excellent linearity of 0.999 over its entire working range (0–350 kPa). Moreover, the sensor shows stable responses under varying loading frequencies, is capable of detecting low-frequency signals, and retains its performance without notable degradation even after 5000 repeated loading-unloading cycles. In practical applications, the sensor accurately monitors flexion and extension movements of the wrist, finger, neck, and knee, capturing human motion signals with high fidelity. Furthermore, it enables information encoding and transmission through finger gestures. The proposed bioinspired structural design strategy effectively enhances the overall performance of porous pressure sensors, offering a new paradigm for the development of flexible sensing devices with promising applications in wearable health monitoring, human motion detection, and human–machine interaction.

Schlagwörter

Stichwörter der Autor:innen

high linearityhuman motion monitoringporous sensorpressure sensor

Autor:innen und Institutionen

  • State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.
  • Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing, Changchun University of Science and Technology, Changchun 130022, China.

ORCID-Profile: Linpeng Liu

Förderung

  • National Natural Science Foundation of China
  • Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University
  • Open Project Program of Key Laboratory for Cross-Scale Micro and Nano Manufacturing, Ministry of Education, Changchun University of Science and Technology

Zitieren

APA

Chen, X., Wang, X., Wu, H., Wang, C., Wang, Y., Liu, L., & Duan, J. (2026). A Bioinspired Flexible Pressure Sensor with High Linearity Based on a Three-Dimensional Porous Structure. Biomimetics, 11(6), 376. https://doi.org/10.3390/biomimetics11060376

Vancouver

Chen X, Wang X, Wu H, Wang C, Wang Y, Liu L, et al. A Bioinspired Flexible Pressure Sensor with High Linearity Based on a Three-Dimensional Porous Structure. Biomimetics. 2026;11(6):376. doi:10.3390/biomimetics11060376

BibTeX
@article{Chen2026,
  author = {Chen, Xingze and Wang, Xin and Wu, Huansheng and Wang, Cong and Wang, Yonghua and Liu, Linpeng and Duan, Ji'an},
  title = {A Bioinspired Flexible Pressure Sensor with High Linearity Based on a Three-Dimensional Porous Structure},
  journal = {Biomimetics},
  year = {2026},
  volume = {11},
  number = {6},
  pages = {376},
  doi = {10.3390/biomimetics11060376}
}
Kostenlos starten →