EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Bioinspired Flexible Pressure Sensor with Rigid–Flexible Coupling Featuring Simple Fabrication, Wide Pressure Range, and High Sensitivity

Zhen Tang, Xingze Chen, Xin Wang, Yangfan Yang, Shanhong Tang, Linpeng Liu iD

Biomimetics · 20.08.2026 · 11 (8) · 594

DOI: 10.3390/biomimetics11080594 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 20.08.2026. Verfasst von Zhen Tang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Automotive and Energy, Xiangtan Institute of Technology, Xiangtan 411100, China. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Research Fund of Hunan Provincial Education Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible pressure sensors with porous structures are essential for wearable electronics and robotic perception. However, traditional porous flexible sensors suffer from poor stability and long recovery times. To address these challenges, a strategy integrating bionic architectures inspired by the rigid–flexible coupling structure of Bambusa textilis and the micro-protrusion structure of Salvia plebeia R.Br. is proposed. An aluminum sheet serves as the support layer, and the sensing layer is prepared through mold replication, material impregnation, and layer-by-layer assembly, offering a simple and scalable fabrication route. The sensor exhibits a broad effective pressure range of 0–31.5 kPa, with a minimum resolvable force of 0.2 N, and within its operating range (0–23.5 kPa), the relationship between resistance and pressure exhibits a trend that can be fitted to a quadratic term, with a coefficient of determination of 0.9986. It achieves a minimum response time of 350 ms and maintains stable signals under dynamic loading at different frequencies, indicating reliable detection of low-frequency weak pressures. After 5000 loading–unloading cycles, the device shows no obvious performance degradation. When mounted on a robotic foot, the sensor successfully distinguishes land, sponge, sand, and pebbles surfaces, demonstrating its potential for intelligent environmental perception.

Schlagwörter

Stichwörter der Autor:innen

environmental sensingminimum responsepressure sensorrigid-flexible coupling

Autor:innen und Institutionen

  • School of Automotive and Energy, Xiangtan Institute of Technology, Xiangtan 411100, China.
  • State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.

ORCID-Profile: Linpeng Liu

Förderung

  • Scientific Research Fund of Hunan Provincial Education Department

Zitieren

APA

Tang, Z., Chen, X., Wang, X., Yang, Y., Tang, S., & Liu, L. (2026). A Bioinspired Flexible Pressure Sensor with Rigid–Flexible Coupling Featuring Simple Fabrication, Wide Pressure Range, and High Sensitivity. Biomimetics, 11(8), 594. https://doi.org/10.3390/biomimetics11080594

Vancouver

Tang Z, Chen X, Wang X, Yang Y, Tang S, Liu L. A Bioinspired Flexible Pressure Sensor with Rigid–Flexible Coupling Featuring Simple Fabrication, Wide Pressure Range, and High Sensitivity. Biomimetics. 2026;11(8):594. doi:10.3390/biomimetics11080594

BibTeX
@article{Tang2026,
  author = {Tang, Zhen and Chen, Xingze and Wang, Xin and Yang, Yangfan and Tang, Shanhong and Liu, Linpeng},
  title = {A Bioinspired Flexible Pressure Sensor with Rigid–Flexible Coupling Featuring Simple Fabrication, Wide Pressure Range, and High Sensitivity},
  journal = {Biomimetics},
  year = {2026},
  volume = {11},
  number = {8},
  pages = {594},
  doi = {10.3390/biomimetics11080594}
}
Kostenlos starten →