Optimization of Actuator Stiffness and Actuation Timing of a Passive Ankle Exoskeleton: A Case Study Using a Musculoskeletal Modeling Approach
Biomimetics · 20.12.2025 · 11 (1) · 2
DOI: 10.3390/biomimetics11010002 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 20.12.2025. Verfasst von Jania Williams und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomechanics and Center for Research in Human Movement Variability, University of Nebraska at Omaha, Omaha, NE 68182, USA. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ACL HHS, University of Nebraska at Omaha, National Aeronautics and Space Administration (NASA) Nebraska Space Grant.
Abstract (Originalsprache)
Objective
A modeling and simulation tool, OpenSim, was used to determine the optimal relationship between actuator stiffness and actuation timing of a passive ankle exoskeleton for reducing metabolic costs during walking. We hypothesized that the absolute minimum in total metabolic cost would exist at an actuation timing of 15% of stance and at a spring stiffness of 7.5 kN/m. We also hypothesized that a local minimum in total metabolic cost would exist at an actuation timing of 50% of stance.
Methods
Bilateral kinematics and kinetics data were collected on a healthy male walking overground wearing his regular tennis shoe. The passive ankle exoskeleton geometry and the spring actuator were integrated into the OpenSim model. Simulations were performed for every combination of 25 spring stiffnesses ranging from 5.5 kN/m to 17.5 kN/m (increments of 0.5 kN/m) and 10 actuation timings ranging from 15% to 60% of stance (increments of 5%). Total energy expenditure was calculated as the sum of the energy expenditure of all the muscles in the model.
Results
The greatest reduction in energy consumption (−2.67%) was observed at an actuation timing of approximately 15% of the stance phase with a spring stiffness of ~5.5 kN/m. A quadratic relationship between spring stiffness and energy consumption was identified (R2 = 0.99), with an optimal stiffness of approximately 5.5 kN/m minimizing the energy cost.
Conclusions
Our findings suggest that OpenSim effectively predicts optimal exoskeleton parameters, supporting personalized assistance to improve energy efficiency and rehabilitation outcomes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomechanics and Center for Research in Human Movement Variability, University of Nebraska at Omaha, Omaha, NE 68182, USA.
- School of Health and Kinesiology, University of Nebraska at Omaha, Omaha, NE 68182, USA.
- Institute for Rehabilitation Science and Engineering, Madonna Rehabilitation Hospitals, Lincoln, NE 68506, USA.
- Department of Surgery and Research Service, Nebraska-Western Iowa Veterans Affairs Medical Center, Omaha, NE 68105, USA.
- School of Podiatric Medicine, University of Texas Rio Grande Valley, Harlingen, TX 78550, USA.
- College of Engineering and Computer Science, University of Texas Rio Grande Valley, Edinburg, TX 78539, USA.
ORCID-Profile: Cody P Anderson, Arash Mohammadzadeh Gonabadi, Farahnaz Fallahtafti, Sara A Myers, Hafizur Rahman
Förderung
- ACL HHS
- University of Nebraska at Omaha
- National Aeronautics and Space Administration (NASA) Nebraska Space Grant
- American Heart Association
- National Institute on Disability, Independent Living, and Rehabilitation Research
- University of Nebraska at Omaha UCRCA grant
Zitieren
APA
Williams, J., Anderson, C. P., Mohammadzadeh Gonabadi, A., Fallahtafti, F., Myers, S. A., & Rahman, H. (2025). Optimization of Actuator Stiffness and Actuation Timing of a Passive Ankle Exoskeleton: A Case Study Using a Musculoskeletal Modeling Approach. Biomimetics, 11(1), 2. https://doi.org/10.3390/biomimetics11010002
Vancouver
Williams J, Anderson CP, Mohammadzadeh Gonabadi A, Fallahtafti F, Myers SA, Rahman H. Optimization of Actuator Stiffness and Actuation Timing of a Passive Ankle Exoskeleton: A Case Study Using a Musculoskeletal Modeling Approach. Biomimetics. 2025;11(1):2. doi:10.3390/biomimetics11010002
BibTeX
@article{Williams2025,
author = {Williams, Jania and Anderson, Cody P and Mohammadzadeh Gonabadi, Arash and Fallahtafti, Farahnaz and Myers, Sara A and Rahman, Hafizur},
title = {Optimization of Actuator Stiffness and Actuation Timing of a Passive Ankle Exoskeleton: A Case Study Using a Musculoskeletal Modeling Approach},
journal = {Biomimetics},
year = {2025},
volume = {11},
number = {1},
pages = {2},
doi = {10.3390/biomimetics11010002}
}
EUVIMED