Electrical Connector Assembly Based on Compliant Tactile Finger with Fingernail
Biomimetics · 05.08.2025 · 10 (8) · 512
DOI: 10.3390/biomimetics10080512 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 05.08.2025. Verfasst von Wenhui Yang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Southeast University, Nanjing 211189, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Open Foundation of State Key Laboratory of Mechanical Transmission for Advanced Equipment, Chongqing University, Taihu Lake Innovation Fund.
Abstract (Originalsprache)
Robotic assembly of electrical connectors enables the automation of high-efficiency production of electronic products. A rigid gripper is adopted as the end-effector by the majority of existing works with a force–torque sensor installed at the wrist, which suffers from very limited perception capability of the manipulated objects. Moreover, the grasping and movement actions, as well as the inconsistency between the robot base and the end-effector frame, tend to result in angular misalignment, usually leading to assembly failure. Bio-inspired by the human finger, we designed a tactile finger in this paper with three characteristics: (1) Compliance: A soft ‘skin’ layer provides passive compliance for plenty of manipulation actions, thus increasing the tolerance for alignment errors. (2) Tactile Perception: Two types of sensing elements are embedded into the soft skin to tactilely sense the involved contact status. (3) Enhanced manipulation force: A rigid fingernail is designed to enhance the manipulation force and enable potential delicate operations. Moreover, a tactile-based alignment algorithm is proposed to search for the optimal orientation angle about the z axis. In the application of U-disk insertion, the three characteristics are validated and a success rate of 100% is achieved, whose generalization capability is also validated through the assembly of three types of electrical connectors.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Southeast University, Nanjing 211189, China.
- State Key Laboratory of Mechanical Transmission for Advanced Equipment, Chongqing University, Chongqing 400044, China.
ORCID-Profile: Wenhui Yang, Hongliang Zhao, Chengxiao He, Longhui Qin
Förderung
- National Natural Science Foundation of China
- Open Foundation of State Key Laboratory of Mechanical Transmission for Advanced Equipment, Chongqing University
- Taihu Lake Innovation Fund
Zitieren
APA
Yang, W., Zhao, H., He, C., & Qin, L. (2025). Electrical Connector Assembly Based on Compliant Tactile Finger with Fingernail. Biomimetics, 10(8), 512. https://doi.org/10.3390/biomimetics10080512
Vancouver
Yang W, Zhao H, He C, Qin L. Electrical Connector Assembly Based on Compliant Tactile Finger with Fingernail. Biomimetics. 2025;10(8):512. doi:10.3390/biomimetics10080512
BibTeX
@article{Yang2025,
author = {Yang, Wenhui and Zhao, Hongliang and He, Chengxiao and Qin, Longhui},
title = {Electrical Connector Assembly Based on Compliant Tactile Finger with Fingernail},
journal = {Biomimetics},
year = {2025},
volume = {10},
number = {8},
pages = {512},
doi = {10.3390/biomimetics10080512}
}
EUVIMED