Research on Finger Pressure Tactile Sensor with Square Hole Structure Based on Fiber Bragg Grating
Sensors · 03.08.2023 · 23 (15) · 6897
DOI: 10.3390/s23156897 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 03.08.2023. Verfasst von Guan Lu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Nantong University, Nantong 226019, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, the Smart Grid Joint Fund of State Key Program of National Natural Science Foundation of China, Major natural science projects of colleges and universities in Jiangsu Province.
Abstract (Originalsprache)
Aiming at the problems of lateral force interference and non-uniform strain of robot fingers in the process of pressure tactile sensing, a flexible tactile sensor with a square hole structure based on fiber Bragg grating (FBG) is proposed in this paper. Firstly, the optimal embedding depth of the FBG in the sensor matrix model was determined by finite element simulation. Secondly, according to the size of the finger knuckle and the simulation analysis based on the pressure tactile sensor element for the robot finger, the square hole structure was designed, and the overall dimensions of the sensing element and size of the square hole were determined. Thirdly, the FBG was embedded in the polydimethylsiloxane (PDMS) elastic matrix to make a sensor model, and the tactile sensor was fabricated. Finally, the FBG pressure tactile sensing system platform was built by using optical fiber sensing technology, and the experiment of the FBG tactile sensor was completed through the sensing system platform. Experimental results show that the tactile sensor designed in this paper has good repeatability and creep resistance. The sensitivity is 8.85 pm/N, and the resolution is 0.2 N. The loading sensitivity based on the robot finger is 27.3 pm/N, the goodness of fit is 0.996, and the average value of interference in the sensing process is 7.63%, which is lower than the solid structure sensor. These results verify that the sensor can effectively reduce the lateral force interference and solve the problem of non-uniform strain and has high fit with fingers, which has a certain application value for the research of robot pressure tactile intelligent perception.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Nantong University, Nantong 226019, China.
- School of Electrical Engineering, Nantong University, Nantong 226019, China.
ORCID-Profile: Yiming Xu
Förderung
- National Natural Science Foundation of China
- the Smart Grid Joint Fund of State Key Program of National Natural Science Foundation of China
- Major natural science projects of colleges and universities in Jiangsu Province
- Postgraduate Research & Practice Innovation Program of Jiangsu Province
- Smart Grid Joint Fund of State Key Program of National Natural Science Foundation of China
- Postgraduate Research & Practice Innovation Program of Jiangsu Province
Zitieren
APA
Lu, G., Fu, S., Zhu, T., & Xu, Y. (2023). Research on Finger Pressure Tactile Sensor with Square Hole Structure Based on Fiber Bragg Grating. Sensors, 23(15), 6897. https://doi.org/10.3390/s23156897
Vancouver
Lu G, Fu S, Zhu T, Xu Y. Research on Finger Pressure Tactile Sensor with Square Hole Structure Based on Fiber Bragg Grating. Sensors. 2023;23(15):6897. doi:10.3390/s23156897
BibTeX
@article{Lu2023,
author = {Lu, Guan and Fu, Shiwen and Zhu, Tianyu and Xu, Yiming},
title = {Research on Finger Pressure Tactile Sensor with Square Hole Structure Based on Fiber Bragg Grating},
journal = {Sensors},
year = {2023},
volume = {23},
number = {15},
pages = {6897},
doi = {10.3390/s23156897}
}
EUVIMED