EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on the Impact Toughness of 3D-Printed CoCrMo Alloy Components Based on Fractal Theory

Guoqing Zhang iD, Junxin Li, Han Wang, Congcong Shangguan, Juanjuan Xie, Yongsheng Zhou

Biomimetics · 06.05.2025 · 10 (5) · 292

DOI: 10.3390/biomimetics10050292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomimetics, online erschienen am 06.05.2025. Verfasst von Guoqing Zhang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, Zhoukou Normal University, Zhoukou 466000, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan Provincial Science and Technology Project, Innovation and Entrepreneurship Training Program for College Students at Zhoukou Normal University, Open Project of Guangxi Key Laboratory of Regenerative Medicine.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to obtain high-performance 3D printed parts, this study focuses on the key performance indicator of impact toughness. The parametric modeling software Rhino 6 is used to design impact specimens, and the laser selective melting equipment DiMetal-100, independently developed by the South China University of Technology, is used to manufacture impact specimens. Subsequently, the CoCrMo alloy parts were annealed using an MXQ1600-40 box-type atmosphere furnace and subjected to impact testing using a cantilever beam impact testing machine XJV-22. Fractal theory was applied to analyze the fractal behavior of the resulting impact fracture surfaces. The research results indicate that the 3D-printed impact specimens exhibited excellent surface quality, characterized by brightness, low roughness, and the absence of significant defects such as warping or deformation. In terms of annealing treatment, lower annealing temperatures did not improve the impact performance of SLM-formed CoCrMo alloy parts but instead led to a decrease in toughness. While increasing the annealing temperature can improve toughness to some extent, the effect is limited. Furthermore, the relationship between impact energy and heat treatment temperature exhibits a U-shaped trend. The fractal dimension analysis shows that the parts annealed in a 1200 °C furnace have the highest fractal dimension and better toughness performance. This study introduces a novel approach by comprehensively integrating advanced 3D printing technology, annealing processes, and fractal theory analysis to systematically investigate the influence of annealing temperature on the impact properties of 3D-printed CoCrMo alloy parts, thereby establishing a solid foundation for the application of high-performance 3D printed parts.

Schlagwörter

Stichwörter der Autor:innen

3D printingfractal dimensionfracture morphologymechanical propertiesresilience

Autor:innen und Institutionen

  • School of Mechanical and Electrical Engineering, Zhoukou Normal University, Zhoukou 466000, China.
  • Veterinary Laboratory, Shangzhou District Animal Health Supervision Institute, Shangluo 726000, China.

ORCID-Profile: Guoqing Zhang

Förderung

  • Henan Provincial Science and Technology Project
  • Innovation and Entrepreneurship Training Program for College Students at Zhoukou Normal University
  • Open Project of Guangxi Key Laboratory of Regenerative Medicine

Zitieren

APA

Zhang, G., Li, J., Wang, H., Shangguan, C., Xie, J., & Zhou, Y. (2025). Research on the Impact Toughness of 3D-Printed CoCrMo Alloy Components Based on Fractal Theory. Biomimetics, 10(5), 292. https://doi.org/10.3390/biomimetics10050292

Vancouver

Zhang G, Li J, Wang H, Shangguan C, Xie J, Zhou Y. Research on the Impact Toughness of 3D-Printed CoCrMo Alloy Components Based on Fractal Theory. Biomimetics. 2025;10(5):292. doi:10.3390/biomimetics10050292

BibTeX
@article{Zhang2025,
  author = {Zhang, Guoqing and Li, Junxin and Wang, Han and Shangguan, Congcong and Xie, Juanjuan and Zhou, Yongsheng},
  title = {Research on the Impact Toughness of 3D-Printed CoCrMo Alloy Components Based on Fractal Theory},
  journal = {Biomimetics},
  year = {2025},
  volume = {10},
  number = {5},
  pages = {292},
  doi = {10.3390/biomimetics10050292}
}
Kostenlos starten →