Formation Theory and Printability of Photocurable Hydrogel for 3D Bioprinting
Advanced Functional Materials · 2023-07 · 33 (29)
DOI: 10.1002/adfm.202301209 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 12.04.2023. Verfasst von Chao‐Fan He und 5 weiteren Autor:innen. Die Arbeit wurde bisher 59-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Bio‐ink has gradually transited from ionic‐crosslinking to photocrosslinking due to photocurable bio‐hydrogel having good formability and biocompatibility. It is very important to understand and quantify the crosslinking process of photocurable hydrogels, otherwise, bioprinting cannot be standardized and scalable. However, there are few studies on hydrogel formation process and its photocrosslinking behavior which cannot be accurately predicted. Herein, the photoinitiated radical polymerized bio‐hydrogels are taken as an example to establish the formation theory. Three typical crosslinking reactions are first distinguished. It is further proposed that not all double‐bonds consumed during crosslinking contributeequally to polymerization. Then the concept of effective double‐bond conversion (EDBC) is elicited. Deriving from EDBC, several important formation indices are defined. According to theory, it is predicted that slow crosslinking can improve the crosslinking degree. Furthermore, based on the slow crosslinking effect, a new strategy of projection‐based 3D printing (PBP) is proposed, which significantly improved printing quality and efficiency. Overall, this work will fill the gap in hydrogel's formation theory, making it possible to accurately quantify the formation process.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
He, C., Sun, Y., Liu, N., Yu, K., Qian, Y., & He, Y. (2023). Formation Theory and Printability of Photocurable Hydrogel for 3D Bioprinting. Advanced Functional Materials, 33(29). https://doi.org/10.1002/adfm.202301209
Vancouver
He C, Sun Y, Liu N, Yu K, Qian Y, He Y. Formation Theory and Printability of Photocurable Hydrogel for 3D Bioprinting. Advanced Functional Materials. 2023;33(29). doi:10.1002/adfm.202301209
BibTeX
@article{He2023,
author = {He, Chao‐Fan and Sun, Yuan and Liu, Nian and Yu, Kang and Qian, Ying and He, Yong},
title = {Formation Theory and Printability of Photocurable Hydrogel for 3D Bioprinting},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {29},
doi = {10.1002/adfm.202301209}
}
EUVIMED