A Viscoelastic Modeling for Failure Analysis of Human Vertebral Bone Undergoing Quasi-Static and Dynamic Compression
Bioengineering · 2026-06-26 · 13 (7) · 747
DOI: 10.3390/bioengineering13070747 ↗At a glance
Journal article in Bioengineering, published online on 2026-06-26. Written by Mahmood Allahyari and 3 co-authors. Institution: Department of Mechanical Engineering, North Dakota State University, Fargo, ND 58102, USA. 38 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
Vertebral fractures are among the most common skeletal injuries and present significant clinical and biomechanical challenges, particularly in older adults and individuals with low bone density. Accurate prediction of vertebral mechanical response and failure under varying loading conditions is essential for improving understanding of spinal injury mechanisms. This study develops a density-dependent viscoelastic analytical model to predict the stiffness and fracture force of human vertebral specimens subjected to different compression rates. The vertebral body is represented as a composite structure consisting of a cortical shell and a trabecular core. Cortical bone is modeled as a linear elastic material, whereas trabecular bone is described using a Kelvin–Voigt viscoelastic formulation. Density-dependent constitutive relationships are incorporated for the elastic modulus and viscous coefficient of trabecular bone. Unknown material parameters are identified through optimization using the Nelder–Mead algorithm, based on experimental compression data from cadaveric vertebral specimens tested under quasi-static and dynamic loading conditions. The calibrated model reproduced the overall trend of specimen-to-specimen mechanical variation observed experimentally. Predicted stiffness values were in reasonable agreement with measured data. Fracture force predictions showed moderate agreement for dynamically tested specimens (R2 = 0.60), which improved to R2 = 0.88 after exclusion of one statistically identified outlier. Compared with a purely linear elastic formulation, the proposed viscoelastic model demonstrated modest improvement in stiffness prediction and more substantial improvement in fracture force prediction. These findings indicate that incorporating density-dependent viscoelastic effects improves representation of vertebral mechanical behavior, particularly at higher loading rates. Owing to its simplicity and computational efficiency, the proposed model requires only limited imaging input and may be useful for future biomechanical investigations, rapid screening, and injury risk prediction.
Subjects
Author keywords
Authors and institutions
- Department of Mechanical Engineering, North Dakota State University, Fargo, ND 58102, USA.
- Department of Mechanical Engineering, Dariun Branch, Islamic Azad University, Dariun 7146704949, Iran.
- Department of Physiology and Biomedical Engineering, Mayo Clinic, Rochester, MN 55905, USA.
ORCID profiles: Mehran Fereydoonpour, Asghar Rezaei, Ghodrat Karami
Cite
APA
Allahyari, M., Fereydoonpour, M., Rezaei, A., & Karami, G. (2026). A Viscoelastic Modeling for Failure Analysis of Human Vertebral Bone Undergoing Quasi-Static and Dynamic Compression. Bioengineering, 13(7), 747. https://doi.org/10.3390/bioengineering13070747
Vancouver
Allahyari M, Fereydoonpour M, Rezaei A, Karami G. A Viscoelastic Modeling for Failure Analysis of Human Vertebral Bone Undergoing Quasi-Static and Dynamic Compression. Bioengineering. 2026;13(7):747. doi:10.3390/bioengineering13070747
BibTeX
@article{Allahyari2026,
author = {Allahyari, Mahmood and Fereydoonpour, Mehran and Rezaei, Asghar and Karami, Ghodrat},
title = {A Viscoelastic Modeling for Failure Analysis of Human Vertebral Bone Undergoing Quasi-Static and Dynamic Compression},
journal = {Bioengineering},
year = {2026},
volume = {13},
number = {7},
pages = {747},
doi = {10.3390/bioengineering13070747}
}
EUVIMED