EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

A Novel Non-Planar Bioprinting Methodology for Enhanced Surface Fidelity of the Cornea

Laura Pérez Sánchez iD, Hodei Gómez-Fernández iD, Maialen Zelaia Amilibia iD, Maria Basañez Elorrieta iD, Eva Larra Mateos iD, Alessandro Scandurra iD, José Luis Pedraz Muñoz iD, Denis Scaini iD, Camilo Cortés iD

Bioengineering · 2026-06-12 · 13 (6) · 682

DOI: 10.3390/bioengineering13060682 ↗

At a glance

Journal article in Bioengineering, published online on 2026-06-12. Written by Laura Pérez Sánchez and 8 co-authors. Institution: Digital Health and Biomedical Technologies, Vicomtech Foundation, Basque Research and Technology Alliance (BRTA), Donostia-San Sebastian, Spain. 62 references. The full text is freely available (open access, CC BY 4.0). Funded by: European Health and Digital Agency (HaDEA), Basque Government, Centro para el Desarrollo Tecnológico y la Innovación (CDTI).

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Traditional 3D bioprinting of corneal constructs relies on planar slicing, which often results in a significant stairstep effect and the loss of anatomical curvature. Curvilinear layering has emerged as a promising alternative to address these limitations. The presented methodology, based on non-planar layer integration, ensures a smoother surface finish. The model’s surface is identified via vertex normals and reconstructed using the Poisson method. Finally, surface parametrization is applied to generate spatially curved trajectories. To validate the algorithm, corneal constructs were printed using a planar and the proposed non-planar approach. Quantitative evaluation of micro-Computed Tomography data revealed that the non-planar approach achieved significantly higher morphological fidelity, successfully replicating the intended parabolic profile of the human cornea. Furthermore, the non-planar constructs demonstrated adequate functional performance, characterized by high optical transparency. Thereby, the feasibility of printing non-planar layers using the proposed novel approach is successfully demonstrated. Furthermore, the comparative analysis confirms the method’s potential for corneal biofabrication when compared to traditional planar methods.

Subjects

Author keywords

corneal tissue engineeringmorphological fidelitynon-planar trajectoriespoisson mesh reconstructionsurface parametrization

Authors and institutions

  • Digital Health and Biomedical Technologies, Vicomtech Foundation, Basque Research and Technology Alliance (BRTA), Donostia-San Sebastian, Spain.
  • AJL Ophthalmic, Ferdinand Zeppelin Kalea, 01510 Vitoria-Gasteiz, Spain.
  • NanoBioCel Research Group, Laboratory of Pharmacy and Pharmaceutical Technology, Department of Pharmacy and Food Science, Faculty of Pharmacy, University of the Basque Country (UPV/EHU), Paseo de la Universidad 7, 01006…
  • BIOMAT Research Group, University of the Basque Country (UPV/EHU) Escuela de Ingeniería de Gipuzkoa, Plaza de Europa 1, 20018 Donostia-San Sebastian, Spain.
  • Makby, 20009 Donostia-San Sebastian, Spain.
  • Bioaraba, NanoBioCel Research Group, 01009 Vitoria-Gasteiz, Spain.

ORCID profiles: Laura Pérez Sánchez, Hodei Gómez-Fernández, Maialen Zelaia Amilibia, Maria Basañez Elorrieta, Eva Larra Mateos, Alessandro Scandurra, José Luis Pedraz Muñoz, Denis Scaini, Camilo Cortés

Funding

  • European Health and Digital Agency (HaDEA)
  • Basque Government
  • Centro para el Desarrollo Tecnológico y la Innovación (CDTI)

Cite

APA

Pérez Sánchez, L., Gómez-Fernández, H., Zelaia Amilibia, M., Basañez Elorrieta, M., Larra Mateos, E., Scandurra, A., Pedraz Muñoz, J. L., Scaini, D., & Cortés, C. (2026). A Novel Non-Planar Bioprinting Methodology for Enhanced Surface Fidelity of the Cornea. Bioengineering, 13(6), 682. https://doi.org/10.3390/bioengineering13060682

Vancouver

Pérez Sánchez L, Gómez-Fernández H, Zelaia Amilibia M, Basañez Elorrieta M, Larra Mateos E, Scandurra A, et al. A Novel Non-Planar Bioprinting Methodology for Enhanced Surface Fidelity of the Cornea. Bioengineering. 2026;13(6):682. doi:10.3390/bioengineering13060682

BibTeX
@article{PrezSnchez2026,
  author = {Pérez Sánchez, Laura and Gómez-Fernández, Hodei and Zelaia Amilibia, Maialen and Basañez Elorrieta, Maria and Larra Mateos, Eva and Scandurra, Alessandro and Pedraz Muñoz, José Luis and Scaini, Denis and Cortés, Camilo},
  title = {A Novel Non-Planar Bioprinting Methodology for Enhanced Surface Fidelity of the Cornea},
  journal = {Bioengineering},
  year = {2026},
  volume = {13},
  number = {6},
  pages = {682},
  doi = {10.3390/bioengineering13060682}
}
Start for free →