EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Limb-Salvage Reconstruction of the Proximal Humerus Using Patient-Specific 3D-Printed PEEK Implants: A Midterm Clinical Study

Tran Duc Thanh iD, Le Duc Huy iD, Nguyen Duc Trung iD, Luong Nhat Anh, Vu Duc Thang, Luu Huu Phuc iD, Le The Hung, Vo Sy Quyen Nang, Pham Trung Hieu, Nguyen Tran Quang Sang, Dang Minh Quang iD, Tran Trung Dung iD

Bioengineering · 22.02.2026 · 13 (2) · 253

DOI: 10.3390/bioengineering13020253 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioengineering, online erschienen am 22.02.2026. Verfasst von Tran Duc Thanh und 11 weiteren Autor:innen. Beteiligte Einrichtung: Sarcoma Center, Vinmec Times City International Hospital, Vinmec Healthcare System, Hanoi 113-900, Vietnam. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Vinmec Healthcare System for APC fee.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Reconstruction of the proximal humerus after wide tumor resection is technically demanding, and traditional methods such as allograft–prosthetic composites, reverse shoulder arthroplasty, and metal implants are limited by graft unavailability, pediatric size mismatch, their high cost, and metal-related stress shielding. Polyether ether ketone (PEEK), with its modulus closer to cortical bone and radiolucency, offers a promising alternative. Building upon the success in craniomaxillofacial surgery and its favorable physical characteristics, we applied personalized 3D-printed PEEK implants for proximal humerus reconstruction. This study reports the first evidence of applying patient-specific 3D-printed PEEK implants in the proximal humerus.

Methods

A retrospective cohort study was conducted on seven patients who underwent wide resection of primary malignant bone tumors of the proximal humerus, followed by reconstruction using patient-specific 3D-printed PEEK implants. Implant design was based on preoperative computed tomography (CT) imaging, incorporating contralateral humeral mirroring and computer-aided design. The implants were fabricated using fused deposition modeling (FDM) with medical-grade PEEK under stringent thermal control (nozzle temperature > 400 °C and heated build chamber), followed by a controlled annealing process to minimize internal stress, optimize polymer crystallinity, and enhance mechanical durability. Outcomes assessed included implant survival, oncologic control, shoulder range of motion, and functional outcomes measured using the Musculoskeletal Tumor Society (MSTS) score. The mean follow-up duration was 56.3 months.

Results

All patient-specific PEEK implants were successfully manufactured and implanted with satisfactory geometric accuracy. Mechanical implant survival was 85.7% at final follow-up, with one implant fracture occurring at 28 months. No cases of deep infection, dislocation, loosening, or permanent neurovascular injury were observed. Local soft-tissue recurrence occurred in two patients (28.6%), without distant metastasis or tumor-related mortality. The limb-salvage rate was 100%. At final follow-up, the mean MSTS score was 23.0 ± 1.6. Shoulder motion was limited but comparable to outcomes reported for conventional anatomic megaprosthetic reconstructions.

Conclusions

Patient-specific 3D-printed PEEK implants provide a feasible and oncologically safe option for proximal humerus reconstruction after tumor resection, with acceptable midterm implant survival and functional outcomes. The favorable elastic modulus and radiolucency of PEEK offer distinct biomechanical and imaging advantages over metallic implants. Further design optimization and larger prospective studies are warranted to enhance mechanical durability and functional restoration.

Schlagwörter

Stichwörter der Autor:innen

3D printingPEEKbone tumorosteosarcomapatient-specific implantproximal humerus reconstruction

Autor:innen und Institutionen

  • Sarcoma Center, Vinmec Times City International Hospital, Vinmec Healthcare System, Hanoi 113-900, Vietnam.
  • Graduate School of Medicine, Osaka Metropolitan University, Osaka 545-8585, Japan.
  • College of Health Sciences, VinUniversity, Hanoi 131-001, Vietnam.
  • 3D Technology in Medicine Center, College of Health Sciences, VinUniversity, Hanoi 131-001, Vietnam.

ORCID-Profile: Tran Duc Thanh, Le Duc Huy, Nguyen Duc Trung, Luu Huu Phuc, Dang Minh Quang, Tran Trung Dung

Förderung

  • Vinmec Healthcare System for APC fee

Zitieren

APA

Thanh, T. D., Huy, L. D., Trung, N. D., Anh, L. N., Thang, V. D., Phuc, L. H., Hung, L. T., Nang, V. S. Q., Hieu, P. T., Sang, N. T. Q., Quang, D. M., & Dung, T. T. (2026). Limb-Salvage Reconstruction of the Proximal Humerus Using Patient-Specific 3D-Printed PEEK Implants: A Midterm Clinical Study. Bioengineering, 13(2), 253. https://doi.org/10.3390/bioengineering13020253

Vancouver

Thanh TD, Huy LD, Trung ND, Anh LN, Thang VD, Phuc LH, et al. Limb-Salvage Reconstruction of the Proximal Humerus Using Patient-Specific 3D-Printed PEEK Implants: A Midterm Clinical Study. Bioengineering. 2026;13(2):253. doi:10.3390/bioengineering13020253

BibTeX
@article{Thanh2026,
  author = {Thanh, Tran Duc and Huy, Le Duc and Trung, Nguyen Duc and Anh, Luong Nhat and Thang, Vu Duc and Phuc, Luu Huu and Hung, Le The and Nang, Vo Sy Quyen and Hieu, Pham Trung and Sang, Nguyen Tran Quang and Quang, Dang Minh and Dung, Tran Trung},
  title = {Limb-Salvage Reconstruction of the Proximal Humerus Using Patient-Specific 3D-Printed PEEK Implants: A Midterm Clinical Study},
  journal = {Bioengineering},
  year = {2026},
  volume = {13},
  number = {2},
  pages = {253},
  doi = {10.3390/bioengineering13020253}
}
Kostenlos starten →