EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Calcium Phosphate Biomaterials for 3D Bioprinting in Bone Tissue Engineering

Nelli Tolmacheva, Amitava Bhattacharyya iD, Insup Noh iD

Biomimetics · 06.02.2024 · 9 (2) · 95

DOI: 10.3390/biomimetics9020095 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Biomimetics, online erschienen am 06.02.2024. Verfasst von Nelli Tolmacheva und 2 weiteren Autor:innen. Beteiligte Einrichtung: Convergence Institute of Biomedical Engineering and Biomaterials, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 98 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional bioprinting is a promising technology for bone tissue engineering. However, most hydrogel bioinks lack the mechanical and post-printing fidelity properties suitable for such hard tissue regeneration. To overcome these weak properties, calcium phosphates can be employed in a bioink to compensate for the lack of certain characteristics. Further, the extracellular matrix of natural bone contains this mineral, resulting in its structural robustness. Thus, calcium phosphates are necessary components of bioink for bone tissue engineering. This review paper examines different recently explored calcium phosphates, as a component of potential bioinks, for the biological, mechanical and structural properties required of 3D bioprinted scaffolds, exploring their distinctive properties that render them favorable biomaterials for bone tissue engineering. The discussion encompasses recent applications and adaptations of 3D-printed scaffolds built with calcium phosphates, delving into the scientific reasons behind the prevalence of certain types of calcium phosphates over others. Additionally, this paper elucidates their interactions with polymer hydrogels for 3D bioprinting applications. Overall, the current status of calcium phosphate/hydrogel bioinks for 3D bioprinting in bone tissue engineering has been investigated.

Schlagwörter

Stichwörter der Autor:innen

3D bioprintingbonecalcium phosphateshydroxyapatiteoctacalcium phosphatetissue engineering

Autor:innen und Institutionen

  • Convergence Institute of Biomedical Engineering and Biomaterials, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea.
  • Department of Chemical and Biomolecular Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea.
  • Medical Electronics Research Center, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea.

ORCID-Profile: Amitava Bhattacharyya, Insup Noh

Zitieren

APA

Tolmacheva, N., Bhattacharyya, A., & Noh, I. (2024). Calcium Phosphate Biomaterials for 3D Bioprinting in Bone Tissue Engineering. Biomimetics, 9(2), 95. https://doi.org/10.3390/biomimetics9020095

Vancouver

Tolmacheva N, Bhattacharyya A, Noh I. Calcium Phosphate Biomaterials for 3D Bioprinting in Bone Tissue Engineering. Biomimetics. 2024;9(2):95. doi:10.3390/biomimetics9020095

BibTeX
@article{Tolmacheva2024,
  author = {Tolmacheva, Nelli and Bhattacharyya, Amitava and Noh, Insup},
  title = {Calcium Phosphate Biomaterials for 3D Bioprinting in Bone Tissue Engineering},
  journal = {Biomimetics},
  year = {2024},
  volume = {9},
  number = {2},
  pages = {95},
  doi = {10.3390/biomimetics9020095}
}
Kostenlos starten →