EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitSystematische ÜbersichtOpen Access · CC BY 4.0

Tissue-Mimicking Material Fabrication and Properties for Multiparametric Ultrasound Phantoms: A Systematic Review

Adel Jawli iD, Wadhhah Aldehani, Ghulam Nabi iD, Zhihong Huang

Bioengineering · 18.06.2024 · 11 (6) · 620

DOI: 10.3390/bioengineering11060620 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Bioengineering, online erschienen am 18.06.2024. Verfasst von Adel Jawli und 3 weiteren Autor:innen. Beteiligte Einrichtung: Division of Imaging Sciences and Technology, School of Medicine, Ninewells Hospital, University of Dundee, Dundee DD1 9SY, UK. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Medical imaging has allowed for significant advancements in the field of ultrasound procedures over the years. However, each imaging modality exhibits distinct limitations that differently affect their accuracy. It is imperative to ensure the quality of each modality to identify and eliminate these limitations. To achieve this, a tissue-mimicking material (TMM) phantom is utilised for validation. This study aims to perform a systematic analysis of tissue-mimicking materials used for creating ultrasound phantoms. We reviewed 234 studies on the use of TMM phantoms in ultrasound that were published from 2013 to 2023 from two research databases. Our focus was on studies that discussed TMMs’ properties and fabrication for ultrasound, elastography, and flow phantoms. The screening process led to the selection of 16 out of 234 studies to include in the analysis. The TMM ultrasound phantoms were categorised into three groups based on the solvent used; each group offers a broad range of physical properties. The water-based material most closely aligns with the properties of ultrasound. This study provides important information about the materials used for ultrasound phantoms. We also compared these materials to real human tissues and found that PVA matches most of the human tissues the best.

Schlagwörter

Stichwörter der Autor:innen

elastographyflow phantomphantomtissue-mimicking materialsultrasound

Autor:innen und Institutionen

  • Division of Imaging Sciences and Technology, School of Medicine, Ninewells Hospital, University of Dundee, Dundee DD1 9SY, UK.
  • Department of Clinical Radiology, Sheikh Jaber Al-Ahmad Al-Sabah Hospital, Ministry of Health, Sulaibikhat 13001, Kuwait.
  • School of Science and Engineering, University of Dundee, Dundee DD1 4HN, UK.

ORCID-Profile: Adel Jawli, Ghulam Nabi

Zitieren

APA

Jawli, A., Aldehani, W., Nabi, G., & Huang, Z. (2024). Tissue-Mimicking Material Fabrication and Properties for Multiparametric Ultrasound Phantoms: A Systematic Review. Bioengineering, 11(6), 620. https://doi.org/10.3390/bioengineering11060620

Vancouver

Jawli A, Aldehani W, Nabi G, Huang Z. Tissue-Mimicking Material Fabrication and Properties for Multiparametric Ultrasound Phantoms: A Systematic Review. Bioengineering. 2024;11(6):620. doi:10.3390/bioengineering11060620

BibTeX
@article{Jawli2024,
  author = {Jawli, Adel and Aldehani, Wadhhah and Nabi, Ghulam and Huang, Zhihong},
  title = {Tissue-Mimicking Material Fabrication and Properties for Multiparametric Ultrasound Phantoms: A Systematic Review},
  journal = {Bioengineering},
  year = {2024},
  volume = {11},
  number = {6},
  pages = {620},
  doi = {10.3390/bioengineering11060620}
}
Kostenlos starten →