EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biomechanical Effects of a Novel Pedicle Screw W-Type Rod Fixation for Lumbar Spondylolysis: A Finite Element Analysis

Jo-Hsi Pan, Chen-Sheng Chen iD, Chien-Lin Liu, Po-Hsin Chou

Bioengineering · 07.04.2023 · 10 (4) · 451

DOI: 10.3390/bioengineering10040451 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioengineering, online erschienen am 07.04.2023. Verfasst von Jo-Hsi Pan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Physical Therapy and Assistive Technology, National Yang Ming Chiao Tung University, Taipei 112, Taiwan. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Veterans General Hospitals and University System of Taiwan Joint Research Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lumbar spondylolysis involves anatomical defects of the pars interarticularis, which causes instability during motion. The instability can be addressed through instrumentation with posterolateral fusion (PLF). We developed a novel pedicle screw W-type rod fixation system and evaluated its biomechanical effects in comparison with PLF and Dynesys stabilization for lumbar spondylolysis via finite element (FE) analysis. A validated lumbar spine model was built using ANSYS 14.5 software. Five FE models were established simulating the intact L1–L5 lumbar spine (INT), bilateral pars defect (Bipars), bilateral pars defect with PLF (Bipars_PLF), Dynesys stabilization (Bipars_Dyn), and W-type rod fixation (Bipars_Wtyp). The range of motion (ROM) of the affected segment, the disc stress (DS), and the facet contact force (FCF) of the cranial segment were compared. In the Bipars model, ROM increased in extension and rotation. Compared with the INT model, Bipars_PLF and Bipars_Dyn exhibited remarkably lower ROMs for the affected segment and imposed greater DS and FCF in the cranial segment. Bipars_Wtyp preserved more ROM and generated lower stress at the cranial segment than Bipars_PLF or Bipars_Dyn. The injury model indicates that this novel pedicle screw W-type rod for spondylolysis fixation could return ROM, DS, and FCF to levels similar to preinjury.

Schlagwörter

Stichwörter der Autor:innen

Dynesys stabilization systemW-type rod fixationfinite element modelslumbar spondylolysispedicle screwposterolateral fusion

Autor:innen und Institutionen

  • Institute of Physical Therapy and Assistive Technology, National Yang Ming Chiao Tung University, Taipei 112, Taiwan.
  • Department of Rehabilitation, Cardinal Tien Hospital, New Taipei 231, Taiwan.
  • Department of Orthopedic and Traumatology, Taipei Veterans General Hospital, Taipei 112, Taiwan.
  • School of Medicine, National Yang Ming Chiao Tung University, Taipei 112, Taiwan.

ORCID-Profile: Chen-Sheng Chen

Förderung

  • Veterans General Hospitals and University System of Taiwan Joint Research Program

Zitieren

APA

Pan, J. H., Chen, C. S., Liu, C. L., & Chou, P. H. (2023). Biomechanical Effects of a Novel Pedicle Screw W-Type Rod Fixation for Lumbar Spondylolysis: A Finite Element Analysis. Bioengineering, 10(4), 451. https://doi.org/10.3390/bioengineering10040451

Vancouver

Pan JH, Chen CS, Liu CL, Chou PH. Biomechanical Effects of a Novel Pedicle Screw W-Type Rod Fixation for Lumbar Spondylolysis: A Finite Element Analysis. Bioengineering. 2023;10(4):451. doi:10.3390/bioengineering10040451

BibTeX
@article{Pan2023,
  author = {Pan, Jo-Hsi and Chen, Chen-Sheng and Liu, Chien-Lin and Chou, Po-Hsin},
  title = {Biomechanical Effects of a Novel Pedicle Screw W-Type Rod Fixation for Lumbar Spondylolysis: A Finite Element Analysis},
  journal = {Bioengineering},
  year = {2023},
  volume = {10},
  number = {4},
  pages = {451},
  doi = {10.3390/bioengineering10040451}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche