Scalable Fabrication of a Na/Na2In Composite Anode with Enhanced Processability and Cycling Stability for Sodium Metal Batteries
Batteries · 04.07.2026 · 12 (7) · 242
DOI: 10.3390/batteries12070242 ↗Kurz gefasst
Fachartikel in der Zeitschrift Batteries, online erschienen am 04.07.2026. Verfasst von Bingqian Zhang und 8 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guizhou Provincial Basic Research Program, Entrepreneurship Training Program for College Student.
Abstract (Originalsprache)
Sodium (Na) metal anodes suffer from poor processability, severe volume fluctuation, unstable interfacial chemistry, and uncontrolled dendrite growth during cycling, which significantly hinder their practical application. Herein, a Na/Na2In composite foil is fabricated through an in situ spontaneous alloying reaction enabled by a simple rolling–folding process using Na and indium (In) foils as precursors. Structural characterizations confirm the complete conversion of metallic In into the Na2In alloy phase, forming a continuous architecture with uniformly distributed Na2In networks embedded within the Na matrix. Owing to the sodiophilic and mechanically robust Na2In framework, the Na/Na2In composite anode effectively regulates Na plating/stripping behavior and suppresses dendritic growth, thereby maintaining a dense and stable electrode morphology during repeated charge/discharge processes. As a result, the Na/Na2In symmetric cell exhibits stable cycling for over 900 h at 0.5 mA cm−2 and 1 mAh cm−2 with low polarization hysteresis, whereas the pure Na counterpart fails after only 143 h. Moreover, full cells paired with NaFe1/3Ni1/3Mn1/3O2 cathodes deliver enhanced cycling stability, retaining 87% of the initial capacity after 100 cycles at 0.5 C, together with improved rate capability. This work demonstrates a scalable mechanical fabrication strategy for high-stability Na metal composite anodes and provides new insights into the practical development of high-energy-density Na metal batteries.
Förderung
- Guizhou Provincial Basic Research Program
- Entrepreneurship Training Program for College Student
Zitieren
APA
Zhang, B., Fu, L., Wang, J., Lv, M., Shu, T., Li, G., Li, Y., Du, J., & Wan, M. (2026). Scalable Fabrication of a Na/Na2In Composite Anode with Enhanced Processability and Cycling Stability for Sodium Metal Batteries. Batteries, 12(7), 242. https://doi.org/10.3390/batteries12070242
Vancouver
Zhang B, Fu L, Wang J, Lv M, Shu T, Li G, et al. Scalable Fabrication of a Na/Na2In Composite Anode with Enhanced Processability and Cycling Stability for Sodium Metal Batteries. Batteries. 2026;12(7):242. doi:10.3390/batteries12070242
BibTeX
@article{Zhang2026,
author = {Zhang, Bingqian and Fu, Lin and Wang, Jingqian and Lv, Menglan and Shu, Tong and Li, Guocheng and Li, Yuanjian and Du, Juan and Wan, Mintao},
title = {Scalable Fabrication of a Na/Na2In Composite Anode with Enhanced Processability and Cycling Stability for Sodium Metal Batteries},
journal = {Batteries},
year = {2026},
volume = {12},
number = {7},
pages = {242},
doi = {10.3390/batteries12070242}
}
EUVIMED