EUVIMEDEUVIMED entdecken
Crossref

“Carbon in Metal” Anode with High Processability for Sodium Metal Batteries

Yukun Liu, Xuyang Liu, Guohua Zhang, Xinyue Shi, Ping Zhang, Yuxin Fan, Yunhui Huang, Renyuan Zhang iD

ACS Applied Materials & Interfaces · 07.06.2023 · 15 (22) · 26691-26699

DOI: 10.1021/acsami.3c03056 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 29.05.2023. Verfasst von Yukun Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute of New Energy for Vehicles, Shanghai Key Laboratory of Development & Application for Metallic Functional Materials, School of Materials Sci…. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: Science and Technology Commission of Shanghai Municipality, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sodium metal batteries are ideal candidates for next-generation grid-level energy storage systems. However, severe obstacles pertain with regard to the usage of metallic Na, including poor processability, dendrite growth, and violent side reactions. Herein, we design a "carbon in metal" anode (denoted as CiM) via a facile method by rolling a controllable amount of mesoporous carbon powder into the Na metal. The as-designed composite anode is endowed with dramatically lowered stickiness and increased hardness (3 times higher than that of pure Na metal) and strength along with improved processability, which can be fabricated into foils with varied patterns and limited thickness (down to 100 μm). Besides, nitrogen-doped mesoporous carbon, which can increase the sodiophilicity, is applied to fabricate N-doped carbon in the metal anode (denoted as N-CiM), which can effectively facilitate the diffusion of Na+ ions and decrease the depositing overpotential, consequently homogenizing the Na+-ion flow and rendering a dense and flat Na deposition. Therefore, the N-CiM anode offers enhanced cycling stability for 800 h at 1 mAh cm-2 in symmetric cells and 1000 cycles with a high average Coulomb efficiency (CE) (99.8%) in full cells based on the conventional carbonate electrolyte.

Schlagwörter

Stichwörter der Autor:innen

dendrite freemesoporous carbonnitrogen dopingprocessabilitysodiophilicitysodium metal batteries

Autor:innen und Institutionen

  • Institute of New Energy for Vehicles, Shanghai Key Laboratory of Development & Application for Metallic Functional Materials, School of Materials Science and Engineering, Tongji University, Shanghai 201804, China.
  • State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.

ORCID-Profile: Renyuan Zhang

Förderung

  • Science and Technology Commission of Shanghai Municipality
  • National Natural Science Foundation of China

Zitieren

APA

Liu, Y., Liu, X., Zhang, G., Shi, X., Zhang, P., Fan, Y., Huang, Y., & Zhang, R. (2023). “Carbon in Metal” Anode with High Processability for Sodium Metal Batteries. ACS Applied Materials & Interfaces, 15(22), 26691-26699. https://doi.org/10.1021/acsami.3c03056

Vancouver

Liu Y, Liu X, Zhang G, Shi X, Zhang P, Fan Y, et al. “Carbon in Metal” Anode with High Processability for Sodium Metal Batteries. ACS Applied Materials & Interfaces. 2023;15(22):26691-26699. doi:10.1021/acsami.3c03056

BibTeX
@article{Liu2023,
  author = {Liu, Yukun and Liu, Xuyang and Zhang, Guohua and Shi, Xinyue and Zhang, Ping and Fan, Yuxin and Huang, Yunhui and Zhang, Renyuan},
  title = {“Carbon in Metal” Anode with High Processability for Sodium Metal Batteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {22},
  pages = {26691--26699},
  doi = {10.1021/acsami.3c03056}
}
Kostenlos starten →