EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid ISMC–FTC Design with PSO Tuning for Finite-Time Stabilization of a 2-DOF Robotic Manipulator

Samara H. Al-dahlaki, Safanah M. Raafat, Shibly A. AI-Samarraie, Amjad J. Humaidi

Automation · 01.09.2026 · 7 (5) · 137

DOI: 10.3390/automation7050137 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Automation, online erschienen am 01.09.2026. Verfasst von Samara H. Al-dahlaki und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes a hybrid integral sliding mode and finite-time control (ISMC–FTC) strategy for a two-degree-of-freedom (2DOF) robotic manipulator, targeting finite-time stability and high-precision elliptical trajectory tracking. To ensure practical deployment, the controller explicitly enforces actuator saturation limits, joint kinematic bounds, workspace constraints, and prescribed stabilization time requirements. Particle swarm optimization (PSO) is employed to tune the FTC parameters, minimizing convergence time while guaranteeing constraint satisfaction. By integrating ISMC’s inherent robustness against matched disturbances with a PSO-optimized FTC, the scheme eliminates the reaching phase and ensures rapid, finite-time convergence. The simulation results demonstrate that the proposed approach significantly reduces stabilization time for both joints, maintains exceptionally low tracking errors, and enforces all physical constraints under bounded disturbances and model uncertainties through explicit saturation limits and sliding manifold invariance. These results validate the framework’s effectiveness and highlight its potential for safety-critical, high-precision robotic applications requiring guaranteed finite-time performance. Robustness is further validated under simultaneous disturbances and uncertainties, where the controller maintains stable performance and consistently satisfies the required robust stability condition.

Zitieren

APA

Al-dahlaki, S. H., Raafat, S. M., AI-Samarraie, S. A., & Humaidi, A. J. (2026). Hybrid ISMC–FTC Design with PSO Tuning for Finite-Time Stabilization of a 2-DOF Robotic Manipulator. Automation, 7(5), 137. https://doi.org/10.3390/automation7050137

Vancouver

Al-dahlaki SH, Raafat SM, AI-Samarraie SA, Humaidi AJ. Hybrid ISMC–FTC Design with PSO Tuning for Finite-Time Stabilization of a 2-DOF Robotic Manipulator. Automation. 2026;7(5):137. doi:10.3390/automation7050137

BibTeX
@article{Aldahlaki2026,
  author = {Al-dahlaki, Samara H. and Raafat, Safanah M. and AI-Samarraie, Shibly A. and Humaidi, Amjad J.},
  title = {Hybrid ISMC–FTC Design with PSO Tuning for Finite-Time Stabilization of a 2-DOF Robotic Manipulator},
  journal = {Automation},
  year = {2026},
  volume = {7},
  number = {5},
  pages = {137},
  doi = {10.3390/automation7050137}
}
Kostenlos starten →