AI-Driven Trajectory Planning of Dentatron: A Compact 4-DOF Dental Robotic Manipulator
Biomimetics · 01.12.2025 · 10 (12) · 803
DOI: 10.3390/biomimetics10120803 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomimetics, online erschienen am 01.12.2025. Verfasst von Amr Ahmed Azhari und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, Jeddah 21589, Saudi Arabia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Abdulaziz University, Deanship of Scientific Research (DSR) at King Abdulaziz University.
Abstract (Originalsprache)
Dental caries is one of the most widespread chronic infectious diseases for humans. It results in localized destruction of dental hard tissues and has negative impacts on systemic health.
Aims
This study aims to design, model, and control a novel 4-DOF dental robotic manipulator, Dentatron, specifically tailored for dental applications. The objectives were to (1) develop a compact robotic arm optimized for dental workspace constraints, (2) implement and compare three controllers—Computed Torque Control (CTC), Fuzzy Logic Control (FLC), and Neural Network Adaptive Control (NNAC), (3) evaluate tracking accuracy, transient response, and robustness in step and trajectory tasks, and (4) assess the potential of adaptive neural controllers for future clinical integration. Materials and Methods: The Dentatron system integrates a custom-designed robotic manipulator with adaptive controllers. The methodology consists of five main stages: robot modeling, control design, neural network adaptation, training, and evaluation. Simulations were performed to evaluate performance across joint tracking and Cartesian trajectory tasks using MATLAB 2022. Human-inspired trajectory design is fundamental to the Dentatron control and simulation framework to emulate the continuous curvature and minimum jerk characteristics of human upper-limb motion. The desired end-effector paths were formulated using fifth-degree polynomial trajectories that produce bell-shaped velocity profiles with gradual acceleration changes.
Results
The study revealed that the Neural Network Adaptive Controller (NNAC) achieved the fastest convergence and lowest tracking error (
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, Jeddah 21589, Saudi Arabia.
- Mechatronics and Robotics Engineering Department, Faculty of Engineering, Egyptian Russian University, Cairo 11829, Egypt.
- Mechanical Engineering Department, Arab Academy for Science Technology and Maritime Transport, Sheraton Branch, Cairo 11757, Egypt.
ORCID-Profile: Amr Ahmed Azhari, Walaa Magdy Ahmed, Mohamed Fawzy El-Khatib, A Abdellatif
Förderung
- King Abdulaziz University
- Deanship of Scientific Research (DSR) at King Abdulaziz University
Zitieren
APA
Azhari, A. A., Ahmed, W. M., El-Khatib, M. F., & Abdellatif, A. (2025). AI-Driven Trajectory Planning of Dentatron: A Compact 4-DOF Dental Robotic Manipulator. Biomimetics, 10(12), 803. https://doi.org/10.3390/biomimetics10120803
Vancouver
Azhari AA, Ahmed WM, El-Khatib MF, Abdellatif A. AI-Driven Trajectory Planning of Dentatron: A Compact 4-DOF Dental Robotic Manipulator. Biomimetics. 2025;10(12):803. doi:10.3390/biomimetics10120803
BibTeX
@article{Azhari2025,
author = {Azhari, Amr Ahmed and Ahmed, Walaa Magdy and El-Khatib, Mohamed Fawzy and Abdellatif, A},
title = {AI-Driven Trajectory Planning of Dentatron: A Compact 4-DOF Dental Robotic Manipulator},
journal = {Biomimetics},
year = {2025},
volume = {10},
number = {12},
pages = {803},
doi = {10.3390/biomimetics10120803}
}
EUVIMED