EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mathematically Compensating for the Barrelling Effect Occurring During Compression Testing of Additive-Manufactured A20X Samples and Describing Friction with Validated Finite Element Models

Konstantin Manuel Prabitz, Alexander Walzl, Martin Stockinger

Applied Mechanics · 12.05.2026 · 7 (2) · 42

DOI: 10.3390/applmech7020042 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Mechanics, online erschienen am 12.05.2026. Verfasst von Konstantin Manuel Prabitz und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Research Promotion Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the deformation behaviour of laser powder bed fusion-produced A20X aluminium alloy and its accurate representation using flow curve models that account for die–specimen friction. Tests across multiple strain rates at room temperature were conducted on a Gleeble 3800; force–displacement data were friction-corrected to derive constitutive flow curves. A mathematical model was developed to capture barrelling and its impact on the stress–strain response, yielding corrected stresses significantly lower than measured values and validating the correction. An equation linking key post-deformation geometric parameters to their mathematical representation correlated well with a calibrated 2D finite element model, which reliably predicted plastic strain and deformation. The model’s friction factors agreed with experimental data, enabling efficient determination of the friction coefficient. Microstructural analysis and micrographs supported the predicted plastic strain distributions. Together, the corrected experiments and validated simulations provide a robust description of A20X’s response and inform performance and application potential.

Förderung

  • Austrian Research Promotion Agency

Zitieren

APA

Prabitz, K. M., Walzl, A., & Stockinger, M. (2026). Mathematically Compensating for the Barrelling Effect Occurring During Compression Testing of Additive-Manufactured A20X Samples and Describing Friction with Validated Finite Element Models. Applied Mechanics, 7(2), 42. https://doi.org/10.3390/applmech7020042

Vancouver

Prabitz KM, Walzl A, Stockinger M. Mathematically Compensating for the Barrelling Effect Occurring During Compression Testing of Additive-Manufactured A20X Samples and Describing Friction with Validated Finite Element Models. Applied Mechanics. 2026;7(2):42. doi:10.3390/applmech7020042

BibTeX
@article{Prabitz2026,
  author = {Prabitz, Konstantin Manuel and Walzl, Alexander and Stockinger, Martin},
  title = {Mathematically Compensating for the Barrelling Effect Occurring During Compression Testing of Additive-Manufactured A20X Samples and Describing Friction with Validated Finite Element Models},
  journal = {Applied Mechanics},
  year = {2026},
  volume = {7},
  number = {2},
  pages = {42},
  doi = {10.3390/applmech7020042}
}
Kostenlos starten →