Prediction of porosity, hardness and surface roughness in additive manufactured AlSi10Mg samples
PLOS ONE · 10.03.2025 · 20 (3) · e0316600
DOI: 10.1371/journal.pone.0316600 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS ONE, online erschienen am 10.03.2025. Verfasst von Fatma Alamri und 3 weiteren Autor:innen. Beteiligte Einrichtung: Management Science and Engineering, Khalifa University, Abu Dhabi, UAE. Hauptthemen laut MEDLINE: Alloys, Magnesium. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Khalifa University.
Abstract (Originalsprache)
Despite the advantages of additive manufacturing, its widespread adoption is still hindered by the poor quality of the fabricated parts. Advanced machine learning techniques to predict part quality can improve repeatability and open additive manufacturing to various industries. This study aims to accurately predict the relative density, surface roughness and hardness of AlSi10Mg samples produced by selective laser melting regarding process parameters such as scan speed, layer thickness, laser power, and hatch distance. For this purpose, data including porosity, surface hardness, and roughness were extracted from the literature, and additional measurements were performed on additive manufactured samples in the current work. This work compares five supervised machine learning algorithms, including artificial neural networks, support vector regression, kernel ridge regression, random forest, and Lasso regression. These models are evaluated based on the coefficient of determination and the mean squared error. On the basis of the computational results, the artificial neural network outperformed in predicting relative density, surface roughness, and hardness. Feature importance analysis on the compiled dataset using ANN revealed that laser power and scan speed are the most important features affecting relative density (e.g., porosity) and hardness, while scan speed and layer thickness significantly impact the surface roughness of the parts. The study identified an optimal laser power and scan speed region that achieves a relative density > 99%, surface roughness < 10 µm, and hardness > 120 HV. The results presented in this study provide significant advantages for additive manufacturing, potentially reducing experimentation costs by identifying the process parameters that optimize the quality of the fabricated parts.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Management Science and Engineering, Khalifa University, Abu Dhabi, UAE.
- Advanced Digital & Additive Manufacturing Research Centre, Khalifa University, Abu Dhabi, UAE.
- Mechanical and Nuclear Engineering, Khalifa University, Abu Dhabi, UAE.
- Department of Engineering Mechanics, Royal Institute of Technology (KTH), Stockholm, Sweden.
- Digital Supply Chain and Operations Research Center, Khalifa University, Abu Dhabi, UAE.
ORCID-Profile: Imad Barsoum, Shrinivas Bojanampati, Maher Maalouf
Förderung
- Khalifa University
Zitieren
APA
Alamri, F., Barsoum, I., Bojanampati, S., & Maalouf, M. (2025). Prediction of porosity, hardness and surface roughness in additive manufactured AlSi10Mg samples. PLOS ONE, 20(3), e0316600. https://doi.org/10.1371/journal.pone.0316600
Vancouver
Alamri F, Barsoum I, Bojanampati S, Maalouf M. Prediction of porosity, hardness and surface roughness in additive manufactured AlSi10Mg samples. PLOS ONE. 2025;20(3):e0316600. doi:10.1371/journal.pone.0316600
BibTeX
@article{Alamri2025,
author = {Alamri, Fatma and Barsoum, Imad and Bojanampati, Shrinivas and Maalouf, Maher},
title = {Prediction of porosity, hardness and surface roughness in additive manufactured AlSi10Mg samples},
journal = {PLOS ONE},
year = {2025},
volume = {20},
number = {3},
pages = {e0316600},
doi = {10.1371/journal.pone.0316600}
}
EUVIMED