Fracture-Toughness-Based Methodology for Determination of 3D-Printed Specimen Using Digital Image Correlation
Applied Mechanics · 02.01.2026 · 7 (1) · 3
DOI: 10.3390/applmech7010003 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Mechanics, online erschienen am 02.01.2026. Verfasst von Ali Makke und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This methodology investigates the determination of the fracture toughness of 3D-printed specimens under monotonic loading conditions. The application is based on the use of a Single Edge Notch Bending (SENB) specimen made by a 3D-printing process (17-4PH stainless steel). The load–displacement curves exhibited linear behavior until crack initiation, indicating that the Linear Elastic Fracture Mechanics (LEFM) can be used under a small-scale yielding assumption. This study extends a previous methodology, originally applied to a polymer, to a metal additively manufactured material. The methodology established in the paper represents a major outcome: the ability to characterize the fracture toughness of the material. This study extends our previous Digital Image Correlation-based methodology from thermoplastic polymers to 17-4PH stainless steel produced by metal additive manufacturing (ADAM). Its novelty lies in combining DIC with a finite element sub-model to evaluate fracture parameters, enabling accurate crack initiation detection in challenging metal AM specimens, and providing a methodology that can be generalized to other metals and AM processes. The aim of this study is to establish a robust DIC-based methodology for the identification of crack initiation and the determination of fracture toughness parameters (K_IC and J) in 3D-printed 17-4PH stainless steel produced by the ADAM process.
Zitieren
APA
Makke, A., Gardan, J., Recho, N., & Zouaoui, M. (2026). Fracture-Toughness-Based Methodology for Determination of 3D-Printed Specimen Using Digital Image Correlation. Applied Mechanics, 7(1), 3. https://doi.org/10.3390/applmech7010003
Vancouver
Makke A, Gardan J, Recho N, Zouaoui M. Fracture-Toughness-Based Methodology for Determination of 3D-Printed Specimen Using Digital Image Correlation. Applied Mechanics. 2026;7(1):3. doi:10.3390/applmech7010003
BibTeX
@article{Makke2026,
author = {Makke, Ali and Gardan, Julien and Recho, Naman and Zouaoui, Marouene},
title = {Fracture-Toughness-Based Methodology for Determination of 3D-Printed Specimen Using Digital Image Correlation},
journal = {Applied Mechanics},
year = {2026},
volume = {7},
number = {1},
pages = {3},
doi = {10.3390/applmech7010003}
}
EUVIMED